Parcours réseau impossible (encore)
bruno
-
stic -
stic -
Salut,
J'ai un réseau 4 pc bureau (2 xp + 2 win 98) reliés avec un Hub.. pas de problème du tout.... vraiment aucun !!!
Je galère (tout seul) depuis 2 mois pour connecter mon portable (Dell Latitude (win 98) équipé carte réseau 3com-FE375C)
Tjrs le même message : parcours réseau impossible.
Le portable ne voit rien du réseau
Les autres pc ne voyent pas le portable
Points testés :
1°) Si je mets une adresse IP sur portable identique à un pc déjà installé = message de conflit
2°) Efface / instal du client microsoft
3°) Efface / instal protocole sur portable
4°) Efface / instal carte 3COM
5°) C'est le même groupe de travail (Mshome)
6°) Ré-installé win 98 sur portable
7°) Nom du portable différent des autres pc
8°) Chargé derniers pilotes pour carte réseau
HELP !!!
J'ai un réseau 4 pc bureau (2 xp + 2 win 98) reliés avec un Hub.. pas de problème du tout.... vraiment aucun !!!
Je galère (tout seul) depuis 2 mois pour connecter mon portable (Dell Latitude (win 98) équipé carte réseau 3com-FE375C)
Tjrs le même message : parcours réseau impossible.
Le portable ne voit rien du réseau
Les autres pc ne voyent pas le portable
Points testés :
1°) Si je mets une adresse IP sur portable identique à un pc déjà installé = message de conflit
2°) Efface / instal du client microsoft
3°) Efface / instal protocole sur portable
4°) Efface / instal carte 3COM
5°) C'est le même groupe de travail (Mshome)
6°) Ré-installé win 98 sur portable
7°) Nom du portable différent des autres pc
8°) Chargé derniers pilotes pour carte réseau
HELP !!!
A voir également:
- Parcours réseau impossible (encore)
- Opérateur de réseau mobile - Guide
- Cable reseau player freebox - Forum Freebox
- Entrer les informations d'identification reseau - Guide
- Partage reseau - Guide
- Entrée dans le réseau des pic - Forum Consommation & Internet
7 réponses
Salut,
1- la carte réseau du portable fonctionne ?
2- Y a t-il un firewall sur le portable ?
3- pour mettre l'adresse Ip d'un autre pc, il faut que ce pc soit débranché du réseau, autrement, c'est sûr qu'il y a conflit...
1- la carte réseau du portable fonctionne ?
2- Y a t-il un firewall sur le portable ?
3- pour mettre l'adresse Ip d'un autre pc, il faut que ce pc soit débranché du réseau, autrement, c'est sûr qu'il y a conflit...
salut bruno
j'ai la solution
tous d'abors tu doit créer une disquette assistant reseau domestique xp pour ensuite l'installer sur ton portable.apres tu peux metre ton adresse ip différnte au autre ordi (faut que les adresse ip soit différente sur chaque pc)
pour creer la disquette tu va dans assistant de reseau domestique sous xp et tu te laisse guider jusqu'a ce que tu tombe sur creer disquette boot reseau (quelque chose comme sa)
j'ai la solution
tous d'abors tu doit créer une disquette assistant reseau domestique xp pour ensuite l'installer sur ton portable.apres tu peux metre ton adresse ip différnte au autre ordi (faut que les adresse ip soit différente sur chaque pc)
pour creer la disquette tu va dans assistant de reseau domestique sous xp et tu te laisse guider jusqu'a ce que tu tombe sur creer disquette boot reseau (quelque chose comme sa)
Donc, j'ai créé la disquette assistant réseau depuis mon XP pas de problème, mais l'installation plante sur le portable win 98.
Planter n'est pas vraiment le mot, l'installation ne se termine jamais, et "ctrl alt sup" me donne "l'assistant ... ne répond pas". Je dois alors fermer cette aplication.
La carte semble fonctionner car les voyants d'initialisation s'allument, mais je vais esayer de la changer.
ou je ne suis pas certain, c'est le type de protocole.
En existe-t-il plusieurs ? y en a-t-il 1 par défaut sur le CD install WIN98 ?
Merci et peut être à +
Planter n'est pas vraiment le mot, l'installation ne se termine jamais, et "ctrl alt sup" me donne "l'assistant ... ne répond pas". Je dois alors fermer cette aplication.
La carte semble fonctionner car les voyants d'initialisation s'allument, mais je vais esayer de la changer.
ou je ne suis pas certain, c'est le type de protocole.
En existe-t-il plusieurs ? y en a-t-il 1 par défaut sur le CD install WIN98 ?
Merci et peut être à +
re salut Képhra,
quelques précisions en attendant le test avec une autre carte réseau :
1°) J'ai rajouté 2 protocoles qui ne semblaient pas y être : TCP/IP et compatible IPX/SPX
résultat : idem parcours réseau impossible + Accès impossible au réseau.
2°) Ping du portable vers l'extérieur : délai d'attente dépassé
3°) Ping du portable vers le portable : OK (octets 32 / temps<10ms / TTL=128)
4°) Ping d'un autre pc vers le portable : délai d'attente dépassé
5°) Ping d'un autre pc vers un autre pc : OK
6°) "Recherche windows ordinateur" du portable : il se trouve .. encore heureux ! mais double click sur son nom j'ai une erreur "TOTO1 pas accessible + Erreur inconnue 2114"
J'arrête là pour aujourd'hui, j'en ai marre et je vais faire des conneries
A+
quelques précisions en attendant le test avec une autre carte réseau :
1°) J'ai rajouté 2 protocoles qui ne semblaient pas y être : TCP/IP et compatible IPX/SPX
résultat : idem parcours réseau impossible + Accès impossible au réseau.
2°) Ping du portable vers l'extérieur : délai d'attente dépassé
3°) Ping du portable vers le portable : OK (octets 32 / temps<10ms / TTL=128)
4°) Ping d'un autre pc vers le portable : délai d'attente dépassé
5°) Ping d'un autre pc vers un autre pc : OK
6°) "Recherche windows ordinateur" du portable : il se trouve .. encore heureux ! mais double click sur son nom j'ai une erreur "TOTO1 pas accessible + Erreur inconnue 2114"
J'arrête là pour aujourd'hui, j'en ai marre et je vais faire des conneries
A+
A tout hasard, tu as bien vérifié que le "client pour les réseaux microsoft" et le "partage de fichiers et d'imprimantes pour les réseaux microsoft" sont bien installés?
(bouton droit sur "connexion au réseau local" > Propriétés")
(bouton droit sur "connexion au réseau local" > Propriétés")
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Bonjour !
J'ai eu ce problème pendant des mois, qui était causé par la raison suivante: quand tu cliques sur menu/démarrer, sur l'onglet "déconnexion", as-tu "déconnexion" tout coiurt ou "déconnexion de xxx" ? Si tu as "déconnexion" tout court, ton problème est connu chez windows: bulletin Q141858 , "No Windows or Network Logon Dialog Box at Startup".
Comment je l'ai résolu: il te faut aller dans la base de registre, utilise "regedit" (menu "éxécuter, regedit). Une fois dans la base de registre; cherche l'entrée suivante:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net
En face de cette entrée de registre, tu verra: AutoLogon=xx
Supprime cela (tu colles le curseur dessus, et tu utilise la touche "suppr").
Tu quittes, tu reboote, et là, miracle, tu vois tous les PC de ton réseau, et tu retrouves, quand tu fais déconnexion, "déconnexion de xxx, xxx étant le nom d'utilisateur que tu as donné lors de l'installation de W98.
C'est ce qui a marché chez moi, j'avais le problème sur 2 PC sous W98SE.
J'espère que cela pourra t'aider.
Pour finir, le texte du bulletin Windows:
No Windows or Network Logon Dialog Box at Startup
Liste des produits concernés par cet article…
This article was previously published under Q141858
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows Registry
SYMPTOMS
When you start Windows, you may not receive a Windows or a network logon dialog box, or you may receive one of the following error messages:
No network provider accepted the given network path.
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
Or, the Change Passwords tab may be missing from the Passwords Properties dialog box. Note that this symptom occurs only if the second cause listed below is in effect. In addition, if you are not prompted to log on and then you immediately log off, you will then receive a prompt to log on.
CAUSE
This behavior can occur if any of the following conditions exists:
· The Primary Network Logon setting is not set correctly.
· The following entry appears in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net
AutoLogon=xx
NOTE: The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.
· : The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.You are logging on to a Novell NetWare network and the server you log on to is running multiple frame types.
· : The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.You are logging on to a Microsoft or NetWare network and you have cached your network password.
· : The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.The network adapter is improperly configured.
RESOLUTION
Use the troubleshooting steps that are listed below to resolve the problem. Make sure to restart Windows after each step and test to see if the problem is resolved.
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
NOTE: You can edit the registry by using System Policy Editor (Poledit.exe) or Registry Editor (Regedit.exe). Check with your network administrator before you make any changes to the registry.
System Policy Editor (Poledit.exe) is available in the Admin\Apptools\Poledit folder on the Windows 95 CD-ROM. Use the Add/Remove Programs tool in Control Panel to install System Policy Editor.
In Windows 98, System Policy Editor is available in the Tools\Reskit\Netadmin\Poledit folder on the Windows 98 CD-ROM.
NOTE: System Policy Editor is not included in the floppy disk version of Windows 95. You can download Policy.exe, a self-extracting file that contains Poledit.exe, from online services. For additional information about downloading Policy.exe, click the article number below to view the article in the Microsoft Knowledge Base:
135315 CD-ROM Extras for Microsoft Windows 95 Update
Troubleshooting Steps
1. Click Start, point to Settings, click Control Panel, and then double-click Network. Click the appropriate setting in the Primary Network Logon box, and then click OK.
2. Delete the following entry in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net
AutoLogon=xx
3. Click Start, point to Settings, click Control Panel, and then double-click Network. Double-click IPX/SPX-Compatible Protocol, click the Advanced tab, click Frame Type, change the value from Auto to the specific frame type that is running on the server you log on to, click OK, and then click OK. If you do not know which frame type is running on the server you log on to,contact your network administrator. Repeat this step as necessary, trying each frame type, to determine if selecting one of the frame types causes a network logon dialog box to appear at startup.
4. Disable the Automatic NetWare Login option by using either System Policy Editor (as described on page 515 of the Microsoft Windows 95 Resource Kit), or by using Registry Editor to add the following DWORD value:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NWNP32\NetworkProvider\DisableDefaultPasswords = 1
For additional information about troubleshooting problems related to enabling the Maximum Sockets or Maximum Connection setting, click the article number below to view the article in the Microsoft Knowledge Base:
142489 Problems After Modifying Maximum Connections or Sockets Value
5. This issue can also occur if the following setting is listed in the registry under the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Network
Disable Password Caching
Whether the value is set to 0 or 1, remove it to resolve this issue.
MORE INFORMATION
If you right-click a NetWare server in Network Neighborhood and then click Attach As on the menu that appears, you have the option to save (or cache) your password. If you save the password, it is stored in your password cache file. If the Primary Network Logon box is not set to Client For NetWare Networks, you are not prompted to log on to your preferred server. For additional information, click the article number below to view the article in the Microsoft Knowledge Base:
127933 Err Msg: No Network Provider Accepted the Given Network Path
The information in this article applies to:
· Microsoft Windows Millennium Edition
· Microsoft Windows 98 Second Edition
· Microsoft Windows 98
· Microsoft Windows 95
Last Reviewed: 12/10/2002 (1.0)
Keywords: kbnetwork kbprb kbWinME msnets win95 win98 win98se KB141858
J'ai eu ce problème pendant des mois, qui était causé par la raison suivante: quand tu cliques sur menu/démarrer, sur l'onglet "déconnexion", as-tu "déconnexion" tout coiurt ou "déconnexion de xxx" ? Si tu as "déconnexion" tout court, ton problème est connu chez windows: bulletin Q141858 , "No Windows or Network Logon Dialog Box at Startup".
Comment je l'ai résolu: il te faut aller dans la base de registre, utilise "regedit" (menu "éxécuter, regedit). Une fois dans la base de registre; cherche l'entrée suivante:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net
En face de cette entrée de registre, tu verra: AutoLogon=xx
Supprime cela (tu colles le curseur dessus, et tu utilise la touche "suppr").
Tu quittes, tu reboote, et là, miracle, tu vois tous les PC de ton réseau, et tu retrouves, quand tu fais déconnexion, "déconnexion de xxx, xxx étant le nom d'utilisateur que tu as donné lors de l'installation de W98.
C'est ce qui a marché chez moi, j'avais le problème sur 2 PC sous W98SE.
J'espère que cela pourra t'aider.
Pour finir, le texte du bulletin Windows:
No Windows or Network Logon Dialog Box at Startup
Liste des produits concernés par cet article…
This article was previously published under Q141858
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows Registry
SYMPTOMS
When you start Windows, you may not receive a Windows or a network logon dialog box, or you may receive one of the following error messages:
No network provider accepted the given network path.
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
Or, the Change Passwords tab may be missing from the Passwords Properties dialog box. Note that this symptom occurs only if the second cause listed below is in effect. In addition, if you are not prompted to log on and then you immediately log off, you will then receive a prompt to log on.
CAUSE
This behavior can occur if any of the following conditions exists:
· The Primary Network Logon setting is not set correctly.
· The following entry appears in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net
AutoLogon=xx
NOTE: The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.
· : The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.You are logging on to a Novell NetWare network and the server you log on to is running multiple frame types.
· : The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.You are logging on to a Microsoft or NetWare network and you have cached your network password.
· : The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.The network adapter is improperly configured.
RESOLUTION
Use the troubleshooting steps that are listed below to resolve the problem. Make sure to restart Windows after each step and test to see if the problem is resolved.
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
NOTE: You can edit the registry by using System Policy Editor (Poledit.exe) or Registry Editor (Regedit.exe). Check with your network administrator before you make any changes to the registry.
System Policy Editor (Poledit.exe) is available in the Admin\Apptools\Poledit folder on the Windows 95 CD-ROM. Use the Add/Remove Programs tool in Control Panel to install System Policy Editor.
In Windows 98, System Policy Editor is available in the Tools\Reskit\Netadmin\Poledit folder on the Windows 98 CD-ROM.
NOTE: System Policy Editor is not included in the floppy disk version of Windows 95. You can download Policy.exe, a self-extracting file that contains Poledit.exe, from online services. For additional information about downloading Policy.exe, click the article number below to view the article in the Microsoft Knowledge Base:
135315 CD-ROM Extras for Microsoft Windows 95 Update
Troubleshooting Steps
1. Click Start, point to Settings, click Control Panel, and then double-click Network. Click the appropriate setting in the Primary Network Logon box, and then click OK.
2. Delete the following entry in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net
AutoLogon=xx
3. Click Start, point to Settings, click Control Panel, and then double-click Network. Double-click IPX/SPX-Compatible Protocol, click the Advanced tab, click Frame Type, change the value from Auto to the specific frame type that is running on the server you log on to, click OK, and then click OK. If you do not know which frame type is running on the server you log on to,contact your network administrator. Repeat this step as necessary, trying each frame type, to determine if selecting one of the frame types causes a network logon dialog box to appear at startup.
4. Disable the Automatic NetWare Login option by using either System Policy Editor (as described on page 515 of the Microsoft Windows 95 Resource Kit), or by using Registry Editor to add the following DWORD value:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NWNP32\NetworkProvider\DisableDefaultPasswords = 1
For additional information about troubleshooting problems related to enabling the Maximum Sockets or Maximum Connection setting, click the article number below to view the article in the Microsoft Knowledge Base:
142489 Problems After Modifying Maximum Connections or Sockets Value
5. This issue can also occur if the following setting is listed in the registry under the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Network
Disable Password Caching
Whether the value is set to 0 or 1, remove it to resolve this issue.
MORE INFORMATION
If you right-click a NetWare server in Network Neighborhood and then click Attach As on the menu that appears, you have the option to save (or cache) your password. If you save the password, it is stored in your password cache file. If the Primary Network Logon box is not set to Client For NetWare Networks, you are not prompted to log on to your preferred server. For additional information, click the article number below to view the article in the Microsoft Knowledge Base:
127933 Err Msg: No Network Provider Accepted the Given Network Path
The information in this article applies to:
· Microsoft Windows Millennium Edition
· Microsoft Windows 98 Second Edition
· Microsoft Windows 98
· Microsoft Windows 95
Last Reviewed: 12/10/2002 (1.0)
Keywords: kbnetwork kbprb kbWinME msnets win95 win98 win98se KB141858
Merci à tous,
Cette fois ça fonctionne ... je suis hyper heureux.
La soluce ? très simple !!
Formatage du pc portable et ré-installation de win98.
Puis installation de la carte réseau et ses pilotes.
Ensuite paramètrage du réseau et là ça a fonctionné.
J'ai pu ensuite installer mes pilotes spécifiques pour la carte vidéo et la carte son.
La leçon que j'en tire est qu'il faut y aller progressivement, tranquillement et vérifier point après point toute modification.
Alors encore merci vous m'avez tous apporté au moins le courage de continuer, car je n'étais plus tout seul dans mon coin.
ciao et peut être à une prochaine
Cette fois ça fonctionne ... je suis hyper heureux.
La soluce ? très simple !!
Formatage du pc portable et ré-installation de win98.
Puis installation de la carte réseau et ses pilotes.
Ensuite paramètrage du réseau et là ça a fonctionné.
J'ai pu ensuite installer mes pilotes spécifiques pour la carte vidéo et la carte son.
La leçon que j'en tire est qu'il faut y aller progressivement, tranquillement et vérifier point après point toute modification.
Alors encore merci vous m'avez tous apporté au moins le courage de continuer, car je n'étais plus tout seul dans mon coin.
ciao et peut être à une prochaine
voila j'ai 3 pc en xp pro , relié par un switch , dison que le pc1 a la connection internet partage
quand je recherche les ordi autour je vois les 3 pc mais quand je ve accede au pc1 qui a la connection internet , je ne peux pas alors que celui-ci peux voir et acceder au autre merci de m'aider
quand je recherche les ordi autour je vois les 3 pc mais quand je ve accede au pc1 qui a la connection internet , je ne peux pas alors que celui-ci peux voir et acceder au autre merci de m'aider
Bonjour,
Normalement le pc connecté à internet (pc1) doit être équipé d'un firewall. (sinon attention virus !!!)
Pour ma part j'ai Norton
Il faut autoriser l'acces des pc 2 & 3 et ceci se fait dans :
Norton Personnal Firewall
Firewall
Configurer
Réseau personnel
Mettre dans Approuvés :
Type : Adresse unique
Adresse : IP "adresse IP du pc 2"
idem pour pc 3
Cela devrait fonctionner
ciao
Normalement le pc connecté à internet (pc1) doit être équipé d'un firewall. (sinon attention virus !!!)
Pour ma part j'ai Norton
Il faut autoriser l'acces des pc 2 & 3 et ceci se fait dans :
Norton Personnal Firewall
Firewall
Configurer
Réseau personnel
Mettre dans Approuvés :
Type : Adresse unique
Adresse : IP "adresse IP du pc 2"
idem pour pc 3
Cela devrait fonctionner
ciao
c'est une piste, je vais changer la carte réseau, au point ou j'en suis ....
A+