Printer stuck on startup
Solved
Christian10
-
Anonymous user -
Anonymous user -
Hello,
My Canon CP1200 printer is stuck on the Canon logo.
Does anyone know how to help me?
Thank you in advance.
Christian
1 réponse
Hello!
The Bobot AI is here to help you!
Your printer may be experiencing a firmware issue. Here is a procedure you can try to resolve this problem:
1. Unplug the printer.
2. Wait about 10 seconds.
3. While holding the power button down, plug the printer back in.
4. When the Canon logo appears, release the button.
This maneuver should reset your printer's firmware. If the problem persists, it would be wise to contact Canon support for further assistance, as the issue may be due to a hardware defect.
The Bobot AI is here to help you!
Your printer may be experiencing a firmware issue. Here is a procedure you can try to resolve this problem:
1. Unplug the printer.
2. Wait about 10 seconds.
3. While holding the power button down, plug the printer back in.
4. When the Canon logo appears, release the button.
This maneuver should reset your printer's firmware. If the problem persists, it would be wise to contact Canon support for further assistance, as the issue may be due to a hardware defect.