ÉCHEC DE RECHERCHE DU DRIVERS DISQUETTE 0================ Closed

Question

A LITTLE HELP PLEASE

I just purchased a DELL OPTIPLEX GX 270 for a friend who is just starting out
I just installed winxp pro office pack and everything and when I restart it tells me...

Diskette drive 0 seek failure

What do you think, thank you

There is no 3 1/2 drive so maybe...

Configuration: Windows XP Internet Explorer 6.0

gordon · Accepted Answer

choose f2 setup in bios choose standard cmos features select drive A option and press enter set the value to "none" and press enter save and exit  it worked for me

gabuzo · Answer

Go to the machine setup disable the floppy drive

kilosto1 · Answer

Hi  done...  still nothing!!  what's up!!

gabuzo · Answer

Ah, Dell...

mamzel_nat · Answer

Hi! I just had this problem with a DELL Inspiron 531 and I managed to fix it. I unplugged everything from my computer and restarted. I then reconnected my monitor, mouse, speakers, and keyboard. I restarted and was able to access the BIOS with F2 on boot. I arrived at the page where it says First Boot Device, which is set to Floppy, and I need to change it using the + button. Then I need to change Boot Up Floppy Seek to Disabled. Then SAVE and Quit. Restarting, it showed an error message DISKETTE DRIVE 0 SEEK FAILURE.. press F1 to boot... Reconnect the other USB ports one by one... As soon as I replugged my printer, the same problem occurred. I unplugged the printer, rebooted... still an error message... F1 and then it works now. It was my printer that I believe has compatibility issues with Vista. Good luck to you!!

clement · Answer

From one day to the next, my computer displayed this message: "diskette drive 0 seek failure"
My computer is from 2002, it's a Dell Dimension 4550.
I've tried everything, nothing works!
Do you have any idea what I could do?

fullman · Answer

Apparently, it's pathological at DELL, same problem with Vostro 200.

I really hope it works because I don't really know anything about software...

I'll let you know in 10 minutes lol if I don't come back, it's because my PC won't start anymore ^^ lol

mamzel_nat · Answer

So can you walk? :P

fullman · Answer

Yes, it worked, I have the same BIOS as this person:

choose F2 setup
under BIOS select standard CMOS features
select drive A option enter
choose the value "none" enter
save and exit

it worked for me

More detailed:

1) Press F2 at startup
2) Use the arrows to select the option 'Standard CMOS Features' and press enter
3) Then select the option Drive A (which is at the end of the screen if I'm not mistaken) with the arrows and press enter
4) And finally choose 'none'
5) Press escape
6) Choose on the right side of the screen (actually the one for exiting) 'Exit with save' and press enter

Kainam · Answer

Hello everyone, it always comes from the memory card reader of your printer or other peripherals. If you turn off all your peripherals, the PC will start up as before...

ottobus · Answer

Hello everyone, I had a similar problem that I fixed quite simply

just make sure that there is nothing connected other than your hard drive and your CD (as well as keyboard, mouse, and screen of course)

at the moment the error message appears, wait for the line that gives you a choice between "F1" and "F2"
go into the setup menu using the F2 key, then set the "primary hard drive" to "on"

then exit this menu using the "Esc" key and save using the "Enter" key when prompted

it will reboot and display the error message again... don’t panic this time press "F1" in the option between the two keys "F1" and "F2" and you'll see it restart like a miracle.

obviously, a small adjustment is necessary afterwards to avoid this kind of inconvenience often caused by a forced shutdown of the machine.

youssef · Answer

same problem up top with dell gx optilex 280 if someone can help me please

ÉCHEC DE RECHERCHE DU DRIVERS DISQUETTE 0================

12 answers

Que choisir test of the freshone air conditioner without a hose

Cannot use my ctp18 tablet with meetingbar

Free phone no tone..

The menu table appears, nothing works please?

The tower lights up but it doesn't restart the pc, what should i do please?

Unable to download

Winslop on github

Taskbar that hides

Pc build help mao purchase guide

Copy/paste scanned text jpeg format