"signal lost"
Solved
Hello, I have 2 reception terminals operating on the same satellite dish. However, for about a month now, out of the 25 channels that were previously visible, 6 are displaying "signal lost." Could the problem be due to the dual-output LNB located in front of the dish being defective? Thank you in advance.
Didier
Configuration: Windows / Internet Explorer 11.0
Didier
Configuration: Windows / Internet Explorer 11.0
1 réponse
Hello,
Start by checking the F sockets, disconnecting and reconnecting them several times to eliminate oxidation; if necessary, redo them properly. Be careful, the slightest "hair" from the braid touching the copper core can mess everything up...
Have you tried rescaning for channels?
--
I call a spade a spade *
*in French in the text
Start by checking the F sockets, disconnecting and reconnecting them several times to eliminate oxidation; if necessary, redo them properly. Be careful, the slightest "hair" from the braid touching the copper core can mess everything up...
Have you tried rescaning for channels?
--
I call a spade a spade *
*in French in the text
I will take a closer look at this tonight.