On W10, reduce the slideshow transition time to under 1 minute.
Solved
renard59930
Posted messages
1
Status
Member
-
gotgot -
gotgot -
Hello,
1:start
2:run
3:type regedit
4: on the run command right-click and select administrator
5:go to HKEY_CURRENT_USER (double click)
6:go to control panel (double click)
7:go to personalization (double click)
8:go to desktop slideshow (double click)
9:right-click on interval
10:modify
11:on value data click on decimal, and there you will see 60000 which corresponds to one minute. Knowing that 1000 corresponds to one second, it's up to you to choose: 5000=5 seconds, 10000=10 seconds etc....
12:after your choice click OK and that's it.
Configuration: Windows / Chrome 58.0.3029.110
1:start
2:run
3:type regedit
4: on the run command right-click and select administrator
5:go to HKEY_CURRENT_USER (double click)
6:go to control panel (double click)
7:go to personalization (double click)
8:go to desktop slideshow (double click)
9:right-click on interval
10:modify
11:on value data click on decimal, and there you will see 60000 which corresponds to one minute. Knowing that 1000 corresponds to one second, it's up to you to choose: 5000=5 seconds, 10000=10 seconds etc....
12:after your choice click OK and that's it.
Configuration: Windows / Chrome 58.0.3029.110
1 answer
-
Hello and welcome as a new member. I followed your demonstration
but it seems to me that you're stating the obvious, as you can already set the display time from 1 second to 30 seconds, which seems
sufficient, and you can adjust photo by photo without going through the registry.
Best regards to you
--
" Donkeys change their minds; fools do not."
Please remember to mark your message as "resolved" if that is the case.
