On W10, reduce the slideshow transition time to under 1 minute.

Solved
renard59930 Posted messages 1 Status Member -  
 gotgot -
Hello,
1:start
2:run
3:type regedit
4: on the run command right-click and select administrator
5:go to HKEY_CURRENT_USER (double click)
6:go to control panel (double click)
7:go to personalization (double click)
8:go to desktop slideshow (double click)
9:right-click on interval
10:modify
11:on value data click on decimal, and there you will see 60000 which corresponds to one minute. Knowing that 1000 corresponds to one second, it's up to you to choose: 5000=5 seconds, 10000=10 seconds etc....
12:after your choice click OK and that's it.

Configuration: Windows / Chrome 58.0.3029.110

1 answer

glandu Posted messages 25505 Registration date   Status Contributor Last intervention   4 090
 
Hello and welcome as a new member. I followed your demonstration
but it seems to me that you're stating the obvious, as you can already set the display time from 1 second to 30 seconds, which seems
sufficient, and you can adjust photo by photo without going through the registry.

Best regards to you
--
" Donkeys change their minds; fools do not."
Please remember to mark your message as "resolved" if that is the case.
11
gotgot
 
Hello. For my part, I tried and it worked except that I cannot reach a duration of less than 10 seconds, even if I enter the correct number. Thank you for any help.
0