Erreur purple apres reinstallation HP

Bonjour,
cher programmeur,
apres une reinstallation d'un PC hp pavilion a6267.fr, a partir de l'image de restauration HP-recovery() tout c'est bien passé. par contre au demarrage ultime, hop l'erreur code purpleapparait. et mon cauchemard commence.
j'ai pu editer le fichier qui contient le code erreur , mai come je m'y connais rien en programmation je vous prie de bien vouloir m'aider
voici le contenu du fichier
--
@echo off
REM ************************************************************************
REM (C) Copyright 2007 Hewlett-Packard Development Company, L.P.
REM ************************************************************************

REM -----------------------------------------------------------------
REM Purpose:
REM Authenticate the DMI flags in each UUT by comparing the
REM DMI content in DMIinfo.ini with the actual DMI flags set in
REM the UUT. This is to ensure the software build we specified for
REM a given UUT is exactly what has been delivered to our customers.
REM Input:
REM c:\hp\support\DMIinfo.ini
REM Output:
REM If any discrepancy occurs, an error dialog will display the
REM localized messages during 1st boot, and the DMI info will be
REM output to c:\hp\support\CodePurple.log.
REM Called by:
REM The First Boot (via precmdline.cmd).
REM Note: Since not all DMI flags need to be checked, some are stored in
REM Exclude.txt:
REM 1. Build-ID => This can be different when switching HAL bit (32 vs 64)
REM 2. Serial Number => This is unique for each UUT
REM 3. SupportID => This value will be re-generated if the SerialNumber is modified.
REM 4. UUID => This is unique for each UUT
REM 5. OEMAuditBootLink => Irrelevant; Used during software build.
REM 6. ExtendOpt for 'DLPause' and 'MSc' => Irrelevant; Used during software build.
REM
REM History:
REM 04/15/06 ss; Called the commonly shared function CompareDMI.cmd (used also by PrescreeDMI).
REM 12/22/06 ss; Modified code to discard case sensitivity.
REM -----------------------------------------------------------------

echo.
call SetVersion.cmd
echo CheckDMI [Version %DMI_REV%]
echo (C) Copyright 2007 Hewlett-Packard Development Company, L.P.
echo.

pushd c:\hp\bin\CheckDMI
set DMI_ERRORLEVEL=1
setlocal ENABLEDELAYEDEXPANSION
set CodePurpleLog=c:\hp\support\CodePurple.log

if not exist c:\hp\support\DMIinfo.ini (
echo "Cannot locate DMIinfo.ini. No DMI validation was performed." >%CodePurpleLog%
goto mismatch
)
copy c:\hp\support\DMIinfo.ini /y /v >NUL
c:\hp\bin\cPC_rDMI.exe /rall >DMIofUUT.ini

REM ----------------------------------------------
REM Compare the DMI contents
REM ----------------------------------------------
call CompareDMI.cmd CheckDMI
if "%DMI_ERRORLEVEL%" EQU "0" goto cleanup

:mismatch
start /w c:\hp\bin\MsgAction.exe "%title%: %message%"
shutdown.exe /s /t 0
goto end

REM -----------------------------------------------------------------
REM Found all matching DMI flags. Clean up before exiting.
REM -----------------------------------------------------------------
:cleanup
cd..
if exist %CodePurpleLog% del %CodePurpleLog% /q
if exist c:\hp\bin\CheckDMI rd c:\hp\bin\CheckDMI /s /q

:end
endlocal
popd
--

Configuration: Windows Vista / Internet Explorer 7.0