View original (French)

Koolsound TXA 650 amplifier issue

soad -  
 Anonymous user -
Hello,

hello everyone
I have a little problem with a Koolsound TXA 650 amplifier (bought from Conrad). I generously lent it to my neighbor yesterday, I did the installation for him by connecting only one speaker (Koolsound type: ZR 12) in bridge mode
and he called me in the middle of the afternoon to tell me that there was no more sound. Indeed, the two small "sig" lights were on; this may be due to overload, but of course he just told me that he didn't know why it had suddenly stopped...
I packed the equipment back up thinking I would let it rest, but today those two lights are still on

So I'm turning to you hoping that someone knows the solution to my problem, aside from returning my nearly new equipment to the store

Thank you for your responses and have a good evening =) 
Configuration: Windows XP Firefox 3.0.11

8 réponses

Réponse 1 / 8
(julien) Posted messages 2114 Status Membre 199
 
He probably went into protection mode when there was a risk of overload or short circuit. I had the same problem with a simple 500W Sony stereo. I had connected an extra subwoofer to it, and I listened to music loudly for an hour, then bam, it shut off and there was no way to get it to work again. So I think the outputs are fried.

So I think it's the same for you.
0
Réponse 2 / 8
soad
 
Should I take it back for a warranty claim?
Yet, there was only one 250w speaker connected to a 1x650w amplifier..
0
Réponse 3 / 8
(julien) Posted messages 2114 Status Membre 199
 
as you changed the speaker to see if it works
0
Réponse 4 / 8
Anonymous user
 
evening
surprising especially in bridge. you have some leeway on the power side
check the fuses!

--
it's a good day to live today!
0
Réponse 5 / 8
soad
 
I don't think it's a speaker problem because the overheating lights are on
but to change the fuses, do you have to open it? I'm afraid that if I open it, it won't be under warranty anymore.
0
Anonymous user
 
evening
I don't know
look at the documentation and feel free to contact Conrad's customer service!
you're right, we shouldn't void the warranty


--
it's a good day to live today!
0
Réponse 6 / 8
(julien) Posted messages 2114 Status Membre 199
 
Yeah, so the best thing is for him to take it to the service center.
0
Réponse 7 / 8
soad
 
ok thanks for your replies =)
0
Réponse 8 / 8
Anonymous user
 
you're welcome
still contact Conrad
you never know
and ask for details about warranty returns, especially transportation costs!

--
it's a good day to live today!
0