Reseau local Win XP et Kubuntu.......
Résolu/Fermé
Polpot_2DRu
Messages postés
123
Date d'inscription
samedi 5 juillet 2008
Statut
Membre
Dernière intervention
23 février 2009
-
27 août 2008 à 19:18
Polpot_2DRu Messages postés 123 Date d'inscription samedi 5 juillet 2008 Statut Membre Dernière intervention 23 février 2009 - 31 août 2008 à 16:21
Polpot_2DRu Messages postés 123 Date d'inscription samedi 5 juillet 2008 Statut Membre Dernière intervention 23 février 2009 - 31 août 2008 à 16:21
A voir également:
- Reseau local Win XP et Kubuntu.......
- Appdata local - Guide
- Ip local - Guide
- Entrer les informations d'identification reseau - Guide
- Local send - Télécharger - Divers Utilitaires
- Cle windows xp - Guide
6 réponses
Bonjour,
1 - peux tu envoyer ton fichier /etc/samba/smb.conf ?
2 - peux tu désactiver totalement le pare feu, juste pour les tests ?
3 - quels sont les droits linux sur les répertoires en questions
4 - quel est l'utilisateur samba défini ?
1 - peux tu envoyer ton fichier /etc/samba/smb.conf ?
2 - peux tu désactiver totalement le pare feu, juste pour les tests ?
3 - quels sont les droits linux sur les répertoires en questions
4 - quel est l'utilisateur samba défini ?
je regarde cela tranquillement et te répond.
Pour info tout de meme :
Le mode de sécurité de samba doit etre "user":
Il faut un utilisateur unix autorisé à lire dans le rep en question
ensuite il faut faire un "smbpasswd -a" pour ajouter ce user à la base de comptes samba (et y mettre un autre password)
Par ailleurs, tu peux aussi avoir des problèmes de diffusion (netbios encapsulé dans tcp ip)
A+
Pour info tout de meme :
Le mode de sécurité de samba doit etre "user":
Il faut un utilisateur unix autorisé à lire dans le rep en question
ensuite il faut faire un "smbpasswd -a" pour ajouter ce user à la base de comptes samba (et y mettre un autre password)
Par ailleurs, tu peux aussi avoir des problèmes de diffusion (netbios encapsulé dans tcp ip)
A+
Polpot_2DRu
Messages postés
123
Date d'inscription
samedi 5 juillet 2008
Statut
Membre
Dernière intervention
23 février 2009
5
28 août 2008 à 14:30
28 août 2008 à 14:30
Je te poste tout ça vers 18h00 là je suis au taf
merci pour ton aide.
merci pour ton aide.
Polpot_2DRu
Messages postés
123
Date d'inscription
samedi 5 juillet 2008
Statut
Membre
Dernière intervention
23 février 2009
5
28 août 2008 à 17:50
28 août 2008 à 17:50
oui je peux désactiver le parefeu pour fair les essais
les droits sont :
drwxrwxr-x 1 polpot2dru users 12288 2008-08-28 00:58 PCNVA10Go
drwxrwxr-x 1 polpot2dru users 4096 2008-08-23 13:34 WinLSD
drwxr-xr-x 41 polpot2dru polpot2dru 4096 2008-08-28 17:36 polpot2dru
Quel est l'utilisateur Samba défini ??
- Je ne vois pas de quoi tu parles ??
Il n'y que moi qui utilise ce pc sous linux et mon nom d'utilisateur est polpot2dru est-ce-qu'il correspond à l'utilisateur Samba ??
j'ai coché dans partage de fichiers : autoriser tous les utilisateurs à partager des dossiers.
etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = true
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody
invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
; logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes
# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
; domain master = auto
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
[PCNVA10GO]
path = /media/PCNVA10Go/
guest ok = yes
read only = no
hosts allow = 192.168.0.10
[WINLSD]
path = /media/WinLSD/
guest ok = yes
comment = 192.168.0.10
[POLPOT2DRU]
path = /home/polpot2dru/
guest ok = yes
read only = no
write list = root
invalid users =
hosts allow = 192.168.0.10
les droits sont :
drwxrwxr-x 1 polpot2dru users 12288 2008-08-28 00:58 PCNVA10Go
drwxrwxr-x 1 polpot2dru users 4096 2008-08-23 13:34 WinLSD
drwxr-xr-x 41 polpot2dru polpot2dru 4096 2008-08-28 17:36 polpot2dru
Quel est l'utilisateur Samba défini ??
- Je ne vois pas de quoi tu parles ??
Il n'y que moi qui utilise ce pc sous linux et mon nom d'utilisateur est polpot2dru est-ce-qu'il correspond à l'utilisateur Samba ??
j'ai coché dans partage de fichiers : autoriser tous les utilisateurs à partager des dossiers.
etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = true
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody
invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
; logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes
# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
; domain master = auto
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
[PCNVA10GO]
path = /media/PCNVA10Go/
guest ok = yes
read only = no
hosts allow = 192.168.0.10
[WINLSD]
path = /media/WinLSD/
guest ok = yes
comment = 192.168.0.10
[POLPOT2DRU]
path = /home/polpot2dru/
guest ok = yes
read only = no
write list = root
invalid users =
hosts allow = 192.168.0.10
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Polpot_2DRu
Messages postés
123
Date d'inscription
samedi 5 juillet 2008
Statut
Membre
Dernière intervention
23 février 2009
5
30 août 2008 à 17:01
30 août 2008 à 17:01
--
citation de TONGS : "L'homme sage ne joue pas à "saute-mouton" avec une licorne... ..."####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user
je dois remplacer
;security = user par
security = user
??
citation de TONGS : "L'homme sage ne joue pas à "saute-mouton" avec une licorne... ..."####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user
je dois remplacer
;security = user par
security = user
??
Polpot_2DRu
Messages postés
123
Date d'inscription
samedi 5 juillet 2008
Statut
Membre
Dernière intervention
23 février 2009
5
31 août 2008 à 16:21
31 août 2008 à 16:21
up
Reseau local Win XP et Kubuntu.......
J'ai trouvé mon bonheur http://forum.ruemontgallet.com/ en fouillant un peu sur le web "GOOGLE IS MY FRIEND"
en fait il faut juste monter un lecteur reseau sous XP comme l'explique si bien ce cher Beren que je cite ci dessous :
dans mon cas ça donne \\192.168.0.12\public\PCNVA10Go par exemple pour le disque dur N° 2
BEREN : ( sur http://forum.ruemontgallet.com/ )
"J'ai fini par trouver la solution (grâce au forum de linuxfr.org). Il suffisait dans l'Explorateur Windows, de choisir Outils/Connecteur Lecteur Réseau, de taper l'adresse comme suit: \\ip_du_linux\public et indiquer le nom et mot de passe d'utilisateur Samba (configuré avec Webmin). Et là, Windows se connecte immédiatement et sans problème. allez comprendre pourquoi à partir du Groupe de Travail dans Favoris Réseaux ça ne marche pas, mais bon, l'essentiel, c'est que ça fonctionne. "
--
citation de TONGS : "L'homme sage ne joue pas à "saute-mouton" avec une licorne... ..."
https://www.forumactif.net/search/lateam2dru.forumactif.net pour l'éclate et la détente.
Reseau local Win XP et Kubuntu.......
J'ai trouvé mon bonheur http://forum.ruemontgallet.com/ en fouillant un peu sur le web "GOOGLE IS MY FRIEND"
en fait il faut juste monter un lecteur reseau sous XP comme l'explique si bien ce cher Beren que je cite ci dessous :
dans mon cas ça donne \\192.168.0.12\public\PCNVA10Go par exemple pour le disque dur N° 2
BEREN : ( sur http://forum.ruemontgallet.com/ )
"J'ai fini par trouver la solution (grâce au forum de linuxfr.org). Il suffisait dans l'Explorateur Windows, de choisir Outils/Connecteur Lecteur Réseau, de taper l'adresse comme suit: \\ip_du_linux\public et indiquer le nom et mot de passe d'utilisateur Samba (configuré avec Webmin). Et là, Windows se connecte immédiatement et sans problème. allez comprendre pourquoi à partir du Groupe de Travail dans Favoris Réseaux ça ne marche pas, mais bon, l'essentiel, c'est que ça fonctionne. "
--
citation de TONGS : "L'homme sage ne joue pas à "saute-mouton" avec une licorne... ..."
https://www.forumactif.net/search/lateam2dru.forumactif.net pour l'éclate et la détente.