[Xorg] Ubuntu 7.04 sur Apple Cube G4
Fermé
Flachy Joe
Messages postés
2103
Date d'inscription
jeudi 16 septembre 2004
Statut
Membre
Dernière intervention
21 novembre 2023
-
27 août 2008 à 19:42
Flachy Joe Messages postés 2103 Date d'inscription jeudi 16 septembre 2004 Statut Membre Dernière intervention 21 novembre 2023 - 16 sept. 2008 à 17:07
Flachy Joe Messages postés 2103 Date d'inscription jeudi 16 septembre 2004 Statut Membre Dernière intervention 21 novembre 2023 - 16 sept. 2008 à 17:07
A voir également:
- [Xorg] Ubuntu 7.04 sur Apple Cube G4
- Ubuntu iso - Télécharger - Systèmes d'exploitation
- Ubuntu 24.04 - Accueil - Ubuntu
- Ubuntu 32 bits - Télécharger - Systèmes d'exploitation
- Metre cube sur clavier ✓ - Forum Word
- Trousseau apple - Guide
8 réponses
Flachy Joe
Messages postés
2103
Date d'inscription
jeudi 16 septembre 2004
Statut
Membre
Dernière intervention
21 novembre 2023
260
29 août 2008 à 11:26
29 août 2008 à 11:26
Pas grand chose de neuf :
J'ai installé Ubuntu 7.04 avec le cd "server".
J'ai ensuite mis à jour vers Hardy en modifiant les dépits.
J'ai installé le paquet "unbuntu-desktop".
Et...
Tout pareil, sauf qu'au moins je n'ai plus à démarrer avec le cd.
J'ai installé Ubuntu 7.04 avec le cd "server".
J'ai ensuite mis à jour vers Hardy en modifiant les dépits.
J'ai installé le paquet "unbuntu-desktop".
Et...
Tout pareil, sauf qu'au moins je n'ai plus à démarrer avec le cd.
marc[i1]
Messages postés
2573
Date d'inscription
vendredi 1 avril 2005
Statut
Contributeur
Dernière intervention
6 septembre 2008
382
29 août 2008 à 11:40
29 août 2008 à 11:40
Salut,
j'ai l'impression que le BusID PCI est faux dans ton xorg.conf !
alors que lspci te donne :
soit : PCI:0.10.0
essaie déjà par commenter le BusID pour voir.
j'ai l'impression que le BusID PCI est faux dans ton xorg.conf !
BusID "PCI:0.16.0"
alors que lspci te donne :
0000:00:10.0 VGA compatible controller
soit : PCI:0.10.0
essaie déjà par commenter le BusID pour voir.
Salut,
l'adresse PCI 0:10:0 est celle du bridge, la carte est bien en 0:16:0 (cf Xorg.0.log plus bas)
j'ai réussi à lancer le serveur X en branchant un ecran VGA, apparement c'est le connecteur ADC qui n'est pas reconnu, il n'apparait pas lors d'un "xrandr --verbose".
xrandr --verbose :
--------------------8<---------------------
Screen 0: minimum 320 x 240, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 (0x55) normal (normal) 0mm x 0mm
Identifier: 0x54
Timestamp: 65065
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0
800x600 (0x55) 28.8MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 36.0KHz
v: height 600 start 0 end 0 total 600 clock 60.0Hz
800x600 (0x56) 26.9MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 33.6KHz
v: height 600 start 0 end 0 total 600 clock 56.0Hz
640x480 (0x57) 18.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
400x300 (0x58) 7.2MHz
h: width 400 start 0 end 0 total 400 skew 0 clock 18.0KHz
v: height 300 start 0 end 0 total 300 clock 60.0Hz
400x300 (0x59) 6.7MHz
h: width 400 start 0 end 0 total 400 skew 0 clock 16.8KHz
v: height 300 start 0 end 0 total 300 clock 56.0Hz
320x240 (0x5a) 4.6MHz
h: width 320 start 0 end 0 total 320 skew 0 clock 14.4KHz
v: height 240 start 0 end 0 total 240 clock 60.0Hz
--------------------8<---------------------
Les données EDID ne sont pas prises en compte sur le moniteur VGA, il affiche en 800x600 alors que
get-edid | parse-edid :
--------------------8<---------------------
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
Identifier "IIYP699"
VendorName "ACA"
ModelName "IIYP699"
# Block type: 2:0 3:fd
HorizSync 24-80
VertRefresh 56-75
# Max dot clock (video bandwidth) 140 MHz
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
# DPMS capabilities: Active off:yes Suspend:no Standby:no
Mode "1280x1024" # vfreq 60.020Hz, hfreq 63.981kHz
DotClock 108.000000
HTimings 1280 1328 1440 1688
VTimings 1024 1025 1028 1066
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
EndSection
--------------------8<---------------------
xorg.conf :
--------------------8<---------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "False"
Option "MacModel" "mini"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
--------------------8<---------------------
Xorg.0.log :
--------------------8<---------------------
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at https://bugs.freedesktop.org/
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See https://www.x.org/wiki/GitPage/ for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)
Current Operating System: Linux ubuntu 2.6.24-19-powerpc #1 Wed Aug 20 18:48:30 UTC 2008 ppc
Build Date: 13 June 2008 01:33:06AM
Before reporting problems, check https://www.x.org/wiki/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 29 13:46:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first core pointer device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(II) Open APM successful
(II) Loader magic: 0x101eb270
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5046 card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0022 card 0000,0000 rev 03 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:1a:0: chip 104c,8020 card 0000,0000 rev 00 class 0c,00,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0f:0: chip 106b,0021 card 0000,0000 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0x90020000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[1] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[2] -1 0 0x80080000 - 0x800fffff (0x80000) MX[B]E
[3] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[4] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[5] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B]E
[6] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[7] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[8] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[9] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0x80080000 from 0x800fffff to 0x80080fff
(II) PCI Memory resource overlap reduced 0x80000000 from 0xffffffff to 0x8007ffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[1] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[2] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[3] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[4] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[5] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[6] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[7] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[8] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[9] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[8] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[9] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[10] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[11] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[12] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched ati from file name ati.ids in autoconfig
(==) Matched ati for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 6.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) Primary Device is: PCI 00:10:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro GL PF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[8] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[9] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[10] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[11] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[12] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(WW) ****INVALID IO ALLOCATION**** b: 0xf0000400 e: 0xf00004ff correcting
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[8] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[9] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[10] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[11] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[12] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] 0 0 0xf00003b0 - 0xf00003bb (0xc) IS[B]
[20] 0 0 0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) R128(0): Depth 24, (==) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "UseFBDev" "False"
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) R128(0): initializing int10
(II) R128(0): No legacy BIOS found -- trying PCI
(II) Attempted to read BIOS 128KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(EE) R128(0): Cannot read V_BIOS (5)
(--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0x90020000
(--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000; xclk=14000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) R128(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) R128(0): Unable to estimate virtual size
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (vrefresh out of range)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (vrefresh out of range)
(II) R128(0): Not using default mode "720x400" (vrefresh out of range)
(II) R128(0): Not using default mode "360x200" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "832x624" (hsync out of range)
(II) R128(0): Not using default mode "416x312" (hsync out of range)
(II) R128(0): Not using default mode "1280x768" (hsync out of range)
(II) R128(0): Not using default mode "640x384" (hsync out of range)
(II) R128(0): Not using default mode "1280x800" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "1152x768" (hsync out of range)
(II) R128(0): Not using default mode "576x384" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1440x900" (hsync out of range)
(II) R128(0): Not using default mode "720x450" (hsync out of range)
(II) R128(0): Not using default mode "1600x1024" (hsync out of range)
(II) R128(0): Not using default mode "800x512" (hsync out of range)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(II) R128(0): Not using default mode "840x525" (hsync out of range)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(--) R128(0): Virtual size is 800x600 (pitch 800)
(**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) R128(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sourceforge.net/
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x90003fff (0x4000) MS[B]
[1] 0 0 0x94000000 - 0x97ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[7] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[8] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[9] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[10] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[11] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[12] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[13] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[14] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] 0 0 0xf0000400 - 0xf00004ff (0x100) IS[B]
[19] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] 0 0 0xf00003b0 - 0xf00003bb (0xc) IS[B](OprU)
[23] 0 0 0xf00003c0 - 0xf00003df (0x20) IS[B](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(II) [drm] loaded kernel module for "r128" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0x94000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x07000201 [AGP 0x106b/0x0020; Card 0x1002/0x5046]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0x00000000
(II) R128(0): [agp] Ring mapped at 0x49052000
(II) R128(0): [agp] ring read ptr handle = 0x00101000
(II) R128(0): [agp] Ring read ptr mapped at 0x48026000
(II) R128(0): [agp] vertex/indirect buffers handle = 0x00102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x49153000
(II) R128(0): [agp] AGP texture map handle = 0x00302000
(II) R128(0): [agp] AGP Texture map mapped at 0x49353000
(II) R128(0): [drm] register handle = 0x90000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (800,2457)
(II) R128(0): Reserved area from (0,600) to (800,602)
(II) R128(0): Largest offscreen area available: 800 x 1855
(II) R128(0): Reserved back buffer from (0,602) to (800,1202)
(II) R128(0): Reserved depth buffer from (0,1202) to (800,1803)
(II) R128(0): Reserved depth span from (0,1802) offset 0x57fd00
(II) R128(0): Reserved 8704 kb for textures at offset 0x77f880
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
30 128x128 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 7212)
(II) R128(0): Largest offscreen area available: 800 x 651
(II) R128(0): DPMS enabled
(WW) R128(0): Option "MacModel" is not used
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 48
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
(II) 3rd Button detected: disabling emulate3Button
--------------------8<---------------------
Le but n'est pas de faire fonctionner le moniteur VGA correctement mais de profiter du connecteur ADC (j'ai recupéré un Apple Cinema Display de 22" en même temps que le Cube...) .
Merci pour toute suggestion.
l'adresse PCI 0:10:0 est celle du bridge, la carte est bien en 0:16:0 (cf Xorg.0.log plus bas)
j'ai réussi à lancer le serveur X en branchant un ecran VGA, apparement c'est le connecteur ADC qui n'est pas reconnu, il n'apparait pas lors d'un "xrandr --verbose".
xrandr --verbose :
--------------------8<---------------------
Screen 0: minimum 320 x 240, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 (0x55) normal (normal) 0mm x 0mm
Identifier: 0x54
Timestamp: 65065
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0
800x600 (0x55) 28.8MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 36.0KHz
v: height 600 start 0 end 0 total 600 clock 60.0Hz
800x600 (0x56) 26.9MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 33.6KHz
v: height 600 start 0 end 0 total 600 clock 56.0Hz
640x480 (0x57) 18.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
400x300 (0x58) 7.2MHz
h: width 400 start 0 end 0 total 400 skew 0 clock 18.0KHz
v: height 300 start 0 end 0 total 300 clock 60.0Hz
400x300 (0x59) 6.7MHz
h: width 400 start 0 end 0 total 400 skew 0 clock 16.8KHz
v: height 300 start 0 end 0 total 300 clock 56.0Hz
320x240 (0x5a) 4.6MHz
h: width 320 start 0 end 0 total 320 skew 0 clock 14.4KHz
v: height 240 start 0 end 0 total 240 clock 60.0Hz
--------------------8<---------------------
Les données EDID ne sont pas prises en compte sur le moniteur VGA, il affiche en 800x600 alors que
get-edid | parse-edid :
--------------------8<---------------------
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
Identifier "IIYP699"
VendorName "ACA"
ModelName "IIYP699"
# Block type: 2:0 3:fd
HorizSync 24-80
VertRefresh 56-75
# Max dot clock (video bandwidth) 140 MHz
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
# DPMS capabilities: Active off:yes Suspend:no Standby:no
Mode "1280x1024" # vfreq 60.020Hz, hfreq 63.981kHz
DotClock 108.000000
HTimings 1280 1328 1440 1688
VTimings 1024 1025 1028 1066
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
EndSection
--------------------8<---------------------
xorg.conf :
--------------------8<---------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "False"
Option "MacModel" "mini"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
--------------------8<---------------------
Xorg.0.log :
--------------------8<---------------------
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at https://bugs.freedesktop.org/
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See https://www.x.org/wiki/GitPage/ for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)
Current Operating System: Linux ubuntu 2.6.24-19-powerpc #1 Wed Aug 20 18:48:30 UTC 2008 ppc
Build Date: 13 June 2008 01:33:06AM
Before reporting problems, check https://www.x.org/wiki/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 29 13:46:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first core pointer device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(II) Open APM successful
(II) Loader magic: 0x101eb270
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5046 card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0022 card 0000,0000 rev 03 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:1a:0: chip 104c,8020 card 0000,0000 rev 00 class 0c,00,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0f:0: chip 106b,0021 card 0000,0000 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0x90020000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[1] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[2] -1 0 0x80080000 - 0x800fffff (0x80000) MX[B]E
[3] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[4] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[5] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B]E
[6] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[7] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[8] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[9] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0x80080000 from 0x800fffff to 0x80080fff
(II) PCI Memory resource overlap reduced 0x80000000 from 0xffffffff to 0x8007ffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[1] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[2] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[3] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[4] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[5] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[6] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[7] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[8] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[9] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[8] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[9] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[10] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[11] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[12] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched ati from file name ati.ids in autoconfig
(==) Matched ati for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 6.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) Primary Device is: PCI 00:10:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro GL PF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[8] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[9] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[10] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[11] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[12] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(WW) ****INVALID IO ALLOCATION**** b: 0xf0000400 e: 0xf00004ff correcting
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[8] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[9] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[10] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[11] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[12] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] 0 0 0xf00003b0 - 0xf00003bb (0xc) IS[B]
[20] 0 0 0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) R128(0): Depth 24, (==) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "UseFBDev" "False"
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) R128(0): initializing int10
(II) R128(0): No legacy BIOS found -- trying PCI
(II) Attempted to read BIOS 128KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(EE) R128(0): Cannot read V_BIOS (5)
(--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0x90020000
(--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000; xclk=14000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) R128(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) R128(0): Unable to estimate virtual size
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (vrefresh out of range)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (vrefresh out of range)
(II) R128(0): Not using default mode "720x400" (vrefresh out of range)
(II) R128(0): Not using default mode "360x200" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "832x624" (hsync out of range)
(II) R128(0): Not using default mode "416x312" (hsync out of range)
(II) R128(0): Not using default mode "1280x768" (hsync out of range)
(II) R128(0): Not using default mode "640x384" (hsync out of range)
(II) R128(0): Not using default mode "1280x800" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "1152x768" (hsync out of range)
(II) R128(0): Not using default mode "576x384" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1440x900" (hsync out of range)
(II) R128(0): Not using default mode "720x450" (hsync out of range)
(II) R128(0): Not using default mode "1600x1024" (hsync out of range)
(II) R128(0): Not using default mode "800x512" (hsync out of range)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(II) R128(0): Not using default mode "840x525" (hsync out of range)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(--) R128(0): Virtual size is 800x600 (pitch 800)
(**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) R128(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sourceforge.net/
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x90003fff (0x4000) MS[B]
[1] 0 0 0x94000000 - 0x97ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[7] -1 0 0x80084000 - 0x80087fff (0x4000) MX[B]E
[8] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]E
[9] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]E
[10] -1 0 0x80082000 - 0x80083fff (0x2000) MX[B]E
[11] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]E
[12] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B)
[13] -1 0 0x90000000 - 0x90003fff (0x4000) MX[B](B)
[14] -1 0 0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] 0 0 0xf0000400 - 0xf00004ff (0x100) IS[B]
[19] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] 0 0 0xf00003b0 - 0xf00003bb (0xc) IS[B](OprU)
[23] 0 0 0xf00003c0 - 0xf00003df (0x20) IS[B](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(II) [drm] loaded kernel module for "r128" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0x94000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x07000201 [AGP 0x106b/0x0020; Card 0x1002/0x5046]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0x00000000
(II) R128(0): [agp] Ring mapped at 0x49052000
(II) R128(0): [agp] ring read ptr handle = 0x00101000
(II) R128(0): [agp] Ring read ptr mapped at 0x48026000
(II) R128(0): [agp] vertex/indirect buffers handle = 0x00102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x49153000
(II) R128(0): [agp] AGP texture map handle = 0x00302000
(II) R128(0): [agp] AGP Texture map mapped at 0x49353000
(II) R128(0): [drm] register handle = 0x90000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (800,2457)
(II) R128(0): Reserved area from (0,600) to (800,602)
(II) R128(0): Largest offscreen area available: 800 x 1855
(II) R128(0): Reserved back buffer from (0,602) to (800,1202)
(II) R128(0): Reserved depth buffer from (0,1202) to (800,1803)
(II) R128(0): Reserved depth span from (0,1802) offset 0x57fd00
(II) R128(0): Reserved 8704 kb for textures at offset 0x77f880
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
30 128x128 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 7212)
(II) R128(0): Largest offscreen area available: 800 x 651
(II) R128(0): DPMS enabled
(WW) R128(0): Option "MacModel" is not used
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 48
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
(II) 3rd Button detected: disabling emulate3Button
--------------------8<---------------------
Le but n'est pas de faire fonctionner le moniteur VGA correctement mais de profiter du connecteur ADC (j'ai recupéré un Apple Cinema Display de 22" en même temps que le Cube...) .
Merci pour toute suggestion.
marc[i1]
Messages postés
2573
Date d'inscription
vendredi 1 avril 2005
Statut
Contributeur
Dernière intervention
6 septembre 2008
382
29 août 2008 à 15:15
29 août 2008 à 15:15
Je crois tu devrais prendre une version plus récente, genre la 8.04
Je crains que ton matériel ne sois pas bien reconnu avec la 7.04
Je crains que ton matériel ne sois pas bien reconnu avec la 7.04
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Flachy Joe
Messages postés
2103
Date d'inscription
jeudi 16 septembre 2004
Statut
Membre
Dernière intervention
21 novembre 2023
260
1 sept. 2008 à 12:59
1 sept. 2008 à 12:59
J'ai installé la 7.04 server sans problème, j'ai ensuite mis à jour vers 8.04 puis installé le package "ubuntu-desktop" résultat : ça ne change rien, le serveur X ne se lance que si il y a uniquement un moniteur VGA, le branchement sur le port ADC bloque tout.
J'ai tenté une mise à jour vers la version expérimentale (intrepid), là il y a du nouveau : le serveur X crash :
Backtrace :
0 : X(xf86SigHandler+0x94) [0x10089574]
[ etc .. :
* libint10 :
LockLegacyVGA
xf86ExtendedInitInt
xf86InitInt10
* r128_drv :
R128PreInit
*X :
InitOutput
main
* libc ]
Je fait en ce moment même un "dpkg-reconfigure -a" parce que je suis partie en cours de mise à jour et je suis pas sur qu'elle soit allée jusqu'au bout.
Merci.
J'ai tenté une mise à jour vers la version expérimentale (intrepid), là il y a du nouveau : le serveur X crash :
Backtrace :
0 : X(xf86SigHandler+0x94) [0x10089574]
[ etc .. :
* libint10 :
LockLegacyVGA
xf86ExtendedInitInt
xf86InitInt10
* r128_drv :
R128PreInit
*X :
InitOutput
main
* libc ]
Je fait en ce moment même un "dpkg-reconfigure -a" parce que je suis partie en cours de mise à jour et je suis pas sur qu'elle soit allée jusqu'au bout.
Merci.
Flachy Joe
Messages postés
2103
Date d'inscription
jeudi 16 septembre 2004
Statut
Membre
Dernière intervention
21 novembre 2023
260
1 sept. 2008 à 13:30
1 sept. 2008 à 13:30
Mise à jour OK
Pas de changement.
Le crash n' lieu qu'avec
Option "UseFBDev" "False"
Sinon :
(EE) Unable to find a valid framebuffer device
(EE) R128(0): Failed to open framebuffer device, [....]
Pas de changement.
Le crash n' lieu qu'avec
Option "UseFBDev" "False"
Sinon :
(EE) Unable to find a valid framebuffer device
(EE) R128(0): Failed to open framebuffer device, [....]
Flachy Joe
Messages postés
2103
Date d'inscription
jeudi 16 septembre 2004
Statut
Membre
Dernière intervention
21 novembre 2023
260
9 sept. 2008 à 19:37
9 sept. 2008 à 19:37
up !
Merci !
Merci !
Flachy Joe
Messages postés
2103
Date d'inscription
jeudi 16 septembre 2004
Statut
Membre
Dernière intervention
21 novembre 2023
260
16 sept. 2008 à 17:07
16 sept. 2008 à 17:07
Des news pour d'éventuelles personnes tombant sur le même écueil :
Il s'agit apparemment d'un bug commun aux cartes Radeon et Rage 128 provoquant la mise en veille du moniteur et l'impossibilité d'en sortir. (cf: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=88623 ).
J'ai posté un nouveau rapport de bug à FreeDesktop : https://bugs.freedesktop.org/show_bug.cgi?id=17547 .
J'ai peur que ce rapport ne mène pas à grand chose vu le nombre de cas concerné (je n'ai trouvé nul part d'information sur un précédant test avec ce matos).
Je me tourne donc vers les développeurs en C ( https://codes-sources.commentcamarche.net/ ) pour adapter la solution qui à été donnée au bug de la carte Radeon, à la Rage 128.
A suivre...
Il s'agit apparemment d'un bug commun aux cartes Radeon et Rage 128 provoquant la mise en veille du moniteur et l'impossibilité d'en sortir. (cf: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=88623 ).
J'ai posté un nouveau rapport de bug à FreeDesktop : https://bugs.freedesktop.org/show_bug.cgi?id=17547 .
J'ai peur que ce rapport ne mène pas à grand chose vu le nombre de cas concerné (je n'ai trouvé nul part d'information sur un précédant test avec ce matos).
Je me tourne donc vers les développeurs en C ( https://codes-sources.commentcamarche.net/ ) pour adapter la solution qui à été donnée au bug de la carte Radeon, à la Rage 128.
A suivre...
