Siemens Hipath 3000 PBX Installation Manual

Good evening, I currently have 2 problems. I have installed a SIEMENS 3550 for 3 years and for some time now, when I try to connect to it via the port that allows administration through the cable and the software, it shows "checking the cards" and remains in that state for several minutes without anything else happening.
Question: is there a solution to remedy this problem?
However, by going through extension 100, I am able to connect to it and make changes to the system. Question: is it possible to declare other users (names) and modify the discrimination class of those already existing?

I am looking for all the documentation (manuals, user guides, and installation guides) to put a HIPATH 1150 back into service.

Thank you.

Hello,

Yes, I am looking for documentation for the PABX range Hipath 3000/3500, specifically the installation and configuration manual, preferably in PDF format.

Thank you in advance.


H2tb

Hello,
I am looking for the manual for the Hipath 3550.
I have a project to connect two sites via VOIP either using an integrated card or an IP gateway.
Thank you for your help.
Best regards.

Je souhaiterais avoir le manuel de configuration du PABX HiPath 1120 et de la série 3000.

Hi and thank you for your help.

We have a HiPath 3350 PABX with OptiPoint terminals acquired in 2002, and after a prolonged power outage, it refuses to restart.

The LEDs on the PABX are lit, but the terminals (OptiPoints) only blink their LEDs several times on startup and then nothing.

Would you have any idea about the problem and how to fix it?

Thanks in advance and best regards.

Hello: k-azz
I am looking for an installation manual for Siemens Hipath 3000. Since
I can't resolve the problem with this installation that has been powered off
for a long time. Once I turn it on, it does not work. I am asking how
to program this installation. Please guide me and what advice do you give me


Thank you in advance.

Thank you very much for the manual.

Hello, I am looking for the installation manual for Hipath 3550, can you help me? Thank you.

Hello,

I'm looking for the HiPath 3000 Manager E software, thank you for your help.

We know very well how to call Siemens, we're not going to wait for you to tell us, Mr.!

Hello,

For any information and details about your Hipath 3000 system

#0

Hi, I have some documents on Hipath.

Hello, I am looking to connect my analog phones to the Siemens Hipath 3000. I have the Soft Console for configuring the parameters on the Hipath 3000, but I don't know how to properly set it up. Can someone help me with the connection of the phones to the system and also provide me with the parameters to modify in order to get the phones working? Thanks in advance, it's just for local calls (office) with 15 or more phones.