View original (French)

TV amplifier connection

Solved
Mustang275 -  
 Mustang275 -
Hello, I want the sound from the TV to come out of the amplifier. I have made several attempts with optical fiber and RCA cables but nothing works.
I have a Samsung TV UE40C6000 and a Yamaha RXV357 amplifier that does not have HDMI.
This is my last chance with you, otherwise I will decide to buy a newer one with HDMI.
Help.


8 answers

  1.
    Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    Hello and welcome to this forum,

    On some amplifiers, you need to assign the optical input and also check the TV audio menu which must be set to "external speakers"

    --
    I call a spade a spade *
         *in French in the text
    0
    1. Mustang275
       
      Indeed, I also tested the optical connection with RCA audio plugs on the amplifier and TV and used the external speakers of the TV. However, on the TV, I have the audio and digital outputs set to In. I think it should be outputting to OUT. Honestly, I don't remember how to proceed.
      0
  2. Mustang275
     
    Je ne peux pas vous aider avec cela.
    0
  3. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    "Except that on the TV I have audio and digital outputs in."
    No, look at the photo "Digital audio OUT optical"
    <ital>"I also tested the optical connection with RCA audio plug on the amplifier" </ital>
    An optical connection is not made with RCA but with an optical cable:
    --
    I call a spade a spade *
    *in French in the text
    0
  4. Mustang275
     
    Yes, I understood well, I misspoke. I made an optical connection with optical cables and in parallel, I made audio connections with RCA. But I think the problem comes from the Mi Box S.
    0
  6. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    If your box is connected via HDMI to the TV, no worries

    --
    I call a spade a spade *
         *in French in the text
    0
    1. Mustang275
       
      Yes, it is connected via HDMI. I tested it with another TV and a TV decoder. I connected my amplifier via optical to the TV decoder and it works; I have the TV sound coming through the amplifier speakers. I don't understand anything anymore.
      1
  7. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    There may be a configuration to make in the TV's audio menu, such as checking "external speakers," for example.

    --
    I call a cat a cat *
    *in French in the text.
    0
    1. Mustang275
       
      I have already tried but without success.
      0
  8. fmq Posted messages 4899 Registration date   Status Contributor Last intervention   721
     
    Hello

    in the sound menu (smode)
    in the additional settings
    SPDIF output
    audio format

    try setting PCM instead of Dolby............
    or the other way around

    cia ciao

    --
    it's a good day to live today!
    0
    1. Mustang275
       
      I also tested it, it only stays in PCM but I just found the solution. I connected a jack cable to my box which I connected to the RCA audio red and white on the amplifier and it works perfectly.
      Thanks anyway for your answers, it was cool.
      0
  9. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    But you're welcome, and feel free to come back if you have any other questions

    --
    I call a spade a spade *
         *in French in the text
    0
    1. Mustang275
       
      Alright, thanks again.
      0