Micro Webcam C920 HD Pro Windows 10 not working
Solved
Saxo0
Posted messages
2
Status
Membre
-
RRT -
RRT -
Hello,
I just bought a Logitech HD Pro C920 webcam, and after struggling to get the image under Windows 10 (it was difficult to install the drivers correctly), I realize that I have no sound.
However, everything seems to be working fine in the control panel.
The leads:
- My microphone works. When I go to "listen to this device" in the microphone settings, the microphone is detected, turns on, and echoes my voice back to me. However, as soon as I uncheck the box, the microphone level bar stops moving, and the microphone disappears from the "volume mixer" panel...
- In Skype, Skype tells me that it cannot connect to my sound card (note that with my old webcam, it worked perfectly)
I've tried a lot of things... uninstalling, manual reinstalling, restarting, changing USB ports... nothing worked (except that I sometimes lost my camera, and it was a hassle to get it back).
I'm stuck and could use some help to figure this out...
I forgot to mention... In the control panel "configure microphone," I get this error message: "Unable to start the wizard ... Please ensure that your audio hardware is working and check your audio configuration in the Sound and Audio Devices Control Panel."
This is a bit of a catch-22...
I even tried driverscloud to update everything, but nothing worked...
HELP!
I just bought a Logitech HD Pro C920 webcam, and after struggling to get the image under Windows 10 (it was difficult to install the drivers correctly), I realize that I have no sound.
However, everything seems to be working fine in the control panel.
The leads:
- My microphone works. When I go to "listen to this device" in the microphone settings, the microphone is detected, turns on, and echoes my voice back to me. However, as soon as I uncheck the box, the microphone level bar stops moving, and the microphone disappears from the "volume mixer" panel...
- In Skype, Skype tells me that it cannot connect to my sound card (note that with my old webcam, it worked perfectly)
I've tried a lot of things... uninstalling, manual reinstalling, restarting, changing USB ports... nothing worked (except that I sometimes lost my camera, and it was a hassle to get it back).
I'm stuck and could use some help to figure this out...
I forgot to mention... In the control panel "configure microphone," I get this error message: "Unable to start the wizard ... Please ensure that your audio hardware is working and check your audio configuration in the Sound and Audio Devices Control Panel."
This is a bit of a catch-22...
I even tried driverscloud to update everything, but nothing worked...
HELP!
2 réponses
For those who are interested, I found it.
It's the latest update of Windows 10.
You need to allow access to the camera and the microphone
in the privacy settings.
There you go!
It's the latest update of Windows 10.
You need to allow access to the camera and the microphone
in the privacy settings.
There you go!
mercibcp
Thank you so much, thanks to you my webcam is operational again. It took me 2 hours to fix my issue, I couldn't take it anymore lol I was lost, thanks!!
Arthur
yeah same
RRT
This problem is not documented at all. Even the MS audio test doesn't mention it. Thank you.