Trouble with FUJI ONKYO 5000-HD
fred5024
Posted messages
12
Status
Member
-
fred5024 Posted messages 12 Status Member -
fred5024 Posted messages 12 Status Member -
Hello,
On the built-in list regarding Astra on my satellite receiver, there are 1KR, 1N and 1L, but not 1M!!!
Obviously when I load the channels, all those from 1M are missing!
What can I do!
Thank you for your advice!
Configuration: Windows / Opera Next 51.0.2830.40
On the built-in list regarding Astra on my satellite receiver, there are 1KR, 1N and 1L, but not 1M!!!
Obviously when I load the channels, all those from 1M are missing!
What can I do!
Thank you for your advice!
Configuration: Windows / Opera Next 51.0.2830.40
1 answer
-
Hello,
Which channels do you not receive?-
-
-
Hello, Apparently, I’m receiving Astra 28.2 E, the ITV channels! HORROR, CBS channels!!! Very strange thing, when I call up the list of satellites, I choose Astra, of course, but my device only shows Astra 1H, 1KR and 1L, and certainly it loads nothing else! On KINGOFSAT, there is 1M 1L 1N 1KR !!! So, no 1N nor 1M on my receiver! The thing is, according to the manual, you can enter a new satellite, but if the / is important, I didn’t find it on the remote, and not for lack of searching! I also looked for an update, but that’s a dead end! The problem might come from one thing I do in computing to reset everything to zero; I did a factory reset, but there, ooops, maybe I shouldn’t have! If you have an idea, it would be welcome and thanks in advance! Ps I tested with a 60 cm dish, a small multimmo, back in Surpin days, very good for Astra, and finally with a rectangular one, very current from Boulanger, but you know the result... the truth is elsewhere...
-
-
-