Telephone socket / ADSL wiring
Solved
stabilo33
Posted messages
8
Status
Membre
-
Ardan -
Ardan -
Hello, Following some work at my place, I had to cut the incoming telephone line and remove the junction box. Temporarily, I wanted to recreate the connection by linking the incoming wire with the wire that powers the socket where my box is plugged in.
I connected the white wire with the white and the gray with the gray... but it doesn't work.
I must have forgotten something.
I connected the white wire with the white and the gray with the gray... but it doesn't work.
I must have forgotten something.
2 réponses
Hello.
We'll see, but if the upstream connection is indeed non-compliant, it's going to be a bit of a hassle.
This is just a suggestion... Bye
--
It's no use running; you must start on time...
We'll see, but if the upstream connection is indeed non-compliant, it's going to be a bit of a hassle.
This is just a suggestion... Bye
--
It's no use running; you must start on time...
Ardan
Thank you for this diagram, I understand better why the FT arrival was colorless in 6 and blue in 8 for my Line 2, noticing that FT used a 2-pair cable Gray/White and Colorless/Blue.
