Enable TCP port on eMule Solved

Question

Hello  It is impossible to activate the TCP port on eMule (so I'm on lowID)! Can someone help me? Thanks in advance!

metalismail · Accepted Answer

You need to open the port on your router (or your box) and it depends on your equipment.

jp gourio · Answer

Give me your email, I will send you an attachment with a screenshot of  my personal settings or by phone if you prefer.

BJPG · Answer

1° Install eMule
2° Launch the assistant for the first launch of eMule (tools). When you reach the port selection, BEFORE running the test, launch "configuration
of your Neufbox".
3° Click on network
4° Click on NAT
5° Fill in the fields as shown in the screenshot. You will find your IP address by typing "ipconfig" in the "run" command.
6° Don't forget to save your settings.
7° Close your connection on the 9 and now perform the port test.
Also, be careful with your firewall. I use Ashampoo without any problems.
It works for me, so it should work for you too.
Sincere regards. JP

Carolo_Carlito · Answer

For the Nine box, there's nothing simpler; just go online and enter the address 192.168.1.1. Then go to NAT network and there you set eMule, then TCP, followed by your port and your IP like 192.168.1., and then you re-enter it, and that's it; you confirm it the same way for UDP.

EnergyDrink · Answer

YOU’RE QUITE ANNOYING WITH EMULE! AND ALWAYS ASKING THE SAME QUESTIONS OVER AND OVER! TAKE A LOOK AT THE FORUM FOR SIMILAR TOPICS, THERE ARE ALREADY REPLIES TO NOTE!  THANK YOU VERY MUCH!  AND I REMIND YOU THAT DOWNLOADING IS ILLEGAL SO..... DON’T BOTHER US WITH EMULE!  --  Make yourself at home! And well in 5 minutes it’s going to be a beautiful mess!

Carolo_Carlito · Answer

Downloading is not illegal; it's what you download that CAN be.

EnergyDrink · Answer

I know, badger, lol (I'm allowed to talk to him like that, he's my brother-in-law and he's less than a meter away from me!) Have a nice evening! And carolo carlito come to Warcraft! :P -- Make yourselves at home! And in 5 minutes it’s going to be a great mess!

Carolo_Carlito · Answer

He's a jacky, he doesn't understand anything at all, and if he keeps it up, I'm going to hit him with an atemi and finish it off with the clothesline move.

OldBoy · Answer

Another nobody dares to question the regulars. I have a livebox & on the Mule I remain on low ID. Is there a way to activate the TCP ports or something else to switch to high ID?  Thanks in advance.

wilfried · Answer

Hi Melanie
listen to me I found out how to solve the problem of opening ports on e-mule
when you are on a server in the right window you can see if you are on LOW ID or HIGH ID,
you need to switch to HIGH ID..
if you want reply to me and I'll tell you how to do it
good luck...oooOOO///^_^\\\OOOooo...
Wilfried

jerome · Answer

Jérôme du 21, I can't find a good TCP and UDP port for eMule, I have a Livebox, can someone help me?

Verba · Answer

Hello, for your ports, type your gateway address in the new page, click on advanced settings, then on firewall, click on NAT-based policy, there you will find the number of your Livebox Sagem ports.

pedro · Answer

Hello, thank you so much for your advice! It’s a bit of a headache but with time we’ll get there!!! Thanks, you guys are the best!

Silk · Answer

Hello,
I have mediaserv and jariv but I can't configure it, it tells me there's a mapping problem to configure manually. I have eMule if anyone can help me :-(
pleeeeeaaaaaaaaassssssssssseeeeeeeeeeeeeeeeeee

Silk · Answer

Hello, scr@t sorry, I didn't quite understand what you told me, could you explain it better please :s I want a more detailed explanation (with an image please if possible) for media serv 512k.

Silk · Answer

Je possède un Sagem Fast 3304.

mirabeau · Answer

For the Neuf Box and Free, remember to check in security: preferences-security-check enable protocol scrambling your ISP won't see that you're connecting your mule enjoy...

cjerome · Answer

Good evening, why does eMule Plus tell me that I am not connected to any server? Can you help me? Thanks in advance. By the way, I have a Neuf Box and I am quite happy with it except for eMule.

alexgate · Answer

Salut, je suis nouveau sur le forum, voilà j'ai eMule 48a et je n'arrive pas à régler eMule avec mes ports TCP/UDP. Je suis en low ID et j'aimerais passer en high ID. Merci de votre part pour m'aider, s'il vous plaît, mon email est ***********. Merci.

Gothic_Bask · Answer

Hi everyone!!

I have the same problem as you, I'm using eMule 0.48 and Vista, and all of a sudden, I can't connect because the network is saturated and TCP connection is impossible. Please help me because I'm freaking out...

Especially since my PC is new

My email: Email address removed Moderation CCM

Thank you very much ;-)

anais62 · Answer

Good evening,  I have a problem with eMule; I'm also on low ID, and I don't know what to enter to configure my Neuf Box in the NAT!! Could someone explain it to me??? Thanks in advance.

ethan86 · Answer

same problem for me on all the versions I know of eMule, they pull the same trick on me.
At the time, I thought a triangle connection wouldn't be bad, but well, I only have an amd64 bit, thanks for replying to me.

ethan86 · Answer

Here I am again, tell me how we could do this without it messing up.

ethan86 · Answer

I always mess it up, why?

ethan86 · Answer

If there are people, answer me.

ethan86 · Answer

yop are you there or not

mecy · Answer

Hello, can someone guide me a bit please... I'm using eMule 0.48 and an Alicebox with two antennas, and for the past two days the arrows have turned yellow while they were green before. In my connection preferences, my download speed is set to 96 and upload speed to 0. My TCP client ports are 28295 and UDP 26760. I think my bandwidth might be 512 but I'm not sure; I'm not very knowledgeable about computers and everything else. Can you help me properly configure eMule? I used to receive files in only 24 hours at a rate of 30-40 kB/s, and now I've dropped to 2-3 kB/s. Thank you very much for your help.

kob · Answer

Hello, we would like to know how to activate the router.

scoobay · Answer

Salut, j'ai un modem Sagem Fast 3304 et je n'arrive pas à ouvrir mes ports.

donkeyePROBLEME · Answer

Hello, I have an Alice box and I can't configure it with emulv0.49a. How can I open the TCP port? Thank you in advance. Please reply to me on the forum.

ponpon033 · Answer

I would like to know how to configure eMule with TCP and port number.

niko · Answer

Hi,  I don't understand anything at all. I followed all the configurations for the firewall and router, I assigned a fixed IP and I'm still on low ID. I really don't know what to do anymore. Can you help me?

nickt00 · Answer

I’m quite good with computers, but I'm stuck with my ports configured through my Livebox. I should mention that it’s the Thomson Mini Livebox, and the configuration is a mess. I'm still getting a low ID. I changed my IP address, but doing so caused the internet to stop working (we have two PCs on Wi-Fi and one via Ethernet). I need help quickly.

LABRIOCHE · Answer

Hi, I know this forum has been around for a while, but it can still be useful for mediaserv. I have the solution if someone needs it, just let me know and I'll explain. My email address has been removed Moderation CCM.

Enable TCP port on eMule

34 réponses

Texture issues in enshrouded

Driver his

Peritel to hdmi conversion

How to access the bios on a compaq notebook

Dsi won't turn on anymore

Search for a song with the lyrics

Left mouse click, touchpad click inactive

Codes stronghold crusader

Stuck computer system repair

Disable write protection mp3 player