Formatage carte SD 2GO

J'ai fait l'erreur de formater ma carte SD EXTREME III SanDisk 2GO avec mon appareil photo numérique Pentax Optio S5i et sa capacité est passée de 2 à 1 GO
J'ai étudié la procédure décrite su le site support de Sandisk mais je bloque à l'étape 12 de la commande dos ( à noter que j'utilise le lecteur de carte intégré à mon portable Sony Vaio et non un lecteur de cartye indépendant).
Quelqu'un peut-il me dire s'il existe un moyen de restaurer la mémoire d'origine et le protocole à suivre. Merci.

Les infos du site San disk:
https://www.customernation.com/pls/ps/ps.ps_main?p_host=304&p_supplier=5096&p_par...


[quote]Answer
Severe corruption on card or card has been reformatted incorrectly

Solution:

If you have a PC card adapter or a Parallel port ImageMate, you can do the following

FDISK your SanDisk Card.

1) Enter the Device Manager by holding the ALT key on your keyboard, and clicking twice on
the "My Computer" icon. This takes you to System Properties wherein a tab called Device Manager resides.

2) Click on "Device Manager".

3) Go down to Disk Drives and click twice on it.

4) Parallel Flash or EUSB Flash or USBAT , DISK TYPE 00 or DISK TYPE 80 or 16 and double click on it.

5) Verify in the Settings window of the drive letter assignment to assure you are looking at our card. (i.e. if your card is using drive letter E: than please verify that in the Current Drive Letter Assignment is E:)

6) Click to uncheck the Int 13 unit box, and then hit "OK".

7) Click the "OK" button again to exit the System Properties window.

8) Reboot your computer.

9) When rebooted, go to "Start" > "Run" and type "cmd" without the quotes.

10) At the c:\windows> directory, type cd\

11) You should now be at c:\>

12) Type: "fdisk" and hit enter

13) You will see a yes or no question about disk space. Type: y, and hit enter

14) At this point you should have an option number 5. Type 5, and hit enter

15) Choose the option that displays the drive letter of your card. (i.e. if it's using E:, select the number that is referring to E: and hit enter.)

16) You should be back at the main menu now.

17) Select option 3, Delete Partition or Logical DOS Drive.

18) Select option 1, Delete Primary DOS Partition.

19) You should be back at the main menu.

20) Select option 1, Create DOS Partition or Logical DOS Drive.

21) Partition created, hit escape until you get the C:\> prompt

22) Type: format (your drive letter here)

23) Type: y, and hit enter.

24) Type: Exit

25) You should be in Windows again.

Done!