View original (French)

Sagem combined registration on base ...

Solved/Closed
TATINE89 -  
 dzd -
Hello,

and all my best wishes
I just bought a Sagen D37V duo with an answering machine
I managed to configure one handset (registration successful) but not the second one ????
I can hear my callers but they can't hear me ???
Can you help me ???

THANK YOU KISSES

Configuration: Windows XP / Firefox 3.6.13

8 answers

  1. cedb
     
    Here is the operating method that worked for me for a Sixty base to combine Sixty:

    Remove the battery compartment from the combination,
    Put the base in pairing mode,
    Replace the battery compartment of the combination, there is a beep,
    Press and hold the button on the combination for about ten seconds, there is a new beep and the pairing flashing turns off.
    14
    1. Deg
       
      Hello,

      I just bought the Sixty from Sagemcom and I can't pair it with my Freebox Revolution. I would like to use it far from the box but I can't without pairing the base.
      Cedb, does the technique you propose allow you to use your Sixty without connecting the base to a phone jack?
      Thank you very much for your help!
      0
    2. cedb
       
      Theoretically yes, it’s a DECT, the revolution works with all DECT phones.
      Do the same manipulation while respecting that of the revolution.
      0
    3. maba
       
      Thank you for the information :)
      0
    4. jyb
       
      Thank you very much,
      it worked very well, I was about to send my phone for repair.
      0
    5. navy
       
      Thank you for your help.
      0
  2. poupougne13 Posted messages 43203 Registration date   Status Member Last intervention   11 050
     
    The display is like on the other mobile >?
    I only see one defect in the device, but well... I can't say for sure, obviously!
    Good luck!
    Regards,
    See you later
    --
    "Who wants to climb a mountain starts from the bottom!"
    Signed: "Gillette" alias "nobody"! ;) (°!°)
    8
    1. TATINE89
       
      Thank you for your help
      I think I will have to move.
      0
  3. TATINE89
     
    Poupougne gave me an answer
    I checked and there's no mute on the phone...
    I can hear them but they can't hear me!!!!!!! Yet, I configured both handsets the same way.
    2
  4. poupougne13 Posted messages 43203 Registration date   Status Member Last intervention   11 050
     
    Hello...

    In my opinion, the registration has nothing to do with your problem: if the mobile is not registered, it usually displays it, but you can neither hear nor talk...!
    Check if you accidentally pressed the "mute" button -

    Best regards,
    See you later
    -
    "He who wants to climb a mountain starts from the bottom!"
    Signed: "Gillette" alias "nobody"! ;) (°!°)
    1
    1. TATINE89
       
      THANK YOU
      I hear very well and they do not hear me.....
      0
  6. Tatine89 Posted messages 3 Registration date   Status Member Last intervention  
     
    Thank you cedb, but it was quite simple: a defect in the handset. Since then, I have installed another one without any issues.
    SEE, it’s not always us who are the incompetent ones :)
    1
  7. cecilec
     
    Hello,

    I have the same problem; I can't link my sixty to the revolution, have you managed to do it? I still haven't found the solution.

    Thank you
    2
  8. poupougne13 Posted messages 43203 Registration date   Status Member Last intervention   11 050
     
    When you're using this mobile, I suppose the other one is hung up?
    Because there are few sets that allow both to be on the line at the same time...
    --
    "He who wants to climb a mountain starts from the bottom!"
    Signed: "Gillette" a.k.a. "nobody"! ;) (°!°)
    0
  9. cityhunter12
     
    Hello, same problem as Deg, I can't pair my sixty with my Freebox Revolution. However, I had no problem with my Epure Swissvoice and my old Sagem......
    If someone has succeeded in the operation.........
    0