Imprimante Canon S900 clignote orange et vert
Fermé
Jackytlse
-
3 nov. 2008 à 13:00
sussi Messages postés 2190 Date d'inscription lundi 5 mai 2008 Statut Membre Dernière intervention 5 mars 2014 - 4 nov. 2008 à 22:13
sussi Messages postés 2190 Date d'inscription lundi 5 mai 2008 Statut Membre Dernière intervention 5 mars 2014 - 4 nov. 2008 à 22:13
A voir également:
- Imprimante canon clignote orange et vert
- Point vert messenger ✓ - Forum Facebook Messenger
- Point vert snapchat - Forum Snapchat
- Canon lbp 2900 - Télécharger - Pilotes & Matériel
- Reseau orange non détecté ✓ - Forum Livebox
- Installer imprimante canon mg2550s sans cd - Forum Imprimante
4 réponses
sussi
Messages postés
2190
Date d'inscription
lundi 5 mai 2008
Statut
Membre
Dernière intervention
5 mars 2014
215
3 nov. 2008 à 14:21
3 nov. 2008 à 14:21
bonjour ici tout les codes de la s900
Fehlercodes beim S900
blink count Error Condition
2 orange /1x grün Paper Feed error
3 orange /1x grün Paper Jam
4 orange /1x grün No Ink error
5 orange /1x grün Cable cover error
6 orange /1x grün NO BJ Cartridge
Druckkopf ersetzen
7 orange /1x grün BJ Cartridge temperature error
Druckkopf ersetzen
8 orange /1x grün Waste Ink warning
Ink Absorber ersetzen
2 orange / grün abwechselnd, dann 1x lang grün CR error - SERVICE, Carriage Encoder Signal konnte nicht gelesen werden - versuchen Sie zuerst den halbtransparenten Plastikstreifen im Inneren des Druckers zu reinigen.
3 orange / grün abwechselnd, dann 1x lang grün LF error
4 orange / grün abwechselnd, dann 1x lang grün Purge Sensor error
6 orange / grün abwechselnd, dann 1x lang grün abnormal internal temperature, meistens defekte Hauptelektronik
7 orange / grün abwechselnd, dann 1x lang grün Waste ink full error, Ink Absorber voll
Ink Absorber ersetzen
8 orange / grün abwechselnd, dann 1x lang grün abnormal Head temperature
Druckkopf ersetzen
9 orange / grün abwechselnd, dann 1x lang grün EEPROM error - Hauptplatine defekt
10 orange / grün abwechselnd, dann 1x lang grün ROM error - Hauptplatine defekt
11 orange / grün abwechselnd, dann 1x lang grün RAM error - Hauptplatine defekt
orange/grünes Dauerblinken RAM error - Hauptplatine defekt
Es wird zwischen orange blinken und toggles unterschieden.
Der Unterschied dabei ist, dass "normale" Fehlercodes durch mehrfaches orange blinken angezeigt werden, und abschließend durch einmaliges längeres grün beendet werden. Anschließend beginnt der Code von vorne.
Beispiel: orange, orange, orange, grün, orange, orange, orange, grün ist der Fehlercode 3x orange.
Die schwerwiegenden Fehlercodes werden durch toggles angezeigt, dabei blinkt der Drucker im Rythmus orange / grün, der Fehlercode wird dann wieder durch ein längeres grün abgeschlossen, und beginnt dann wieder von vorne. Jedes orange/grün zählt dabei als 1 toggle.
Beispiel: orange, grün, orange, grün, grün, orange, grün, orange, grün, grün ist der Fehlercode 2 toggles orange / grün...
COPYRIGHT (C) BY WWW.HELPDESC.DE - IHREM CANON SPEZIALISTEN
je sais cest en allemand mais grün(=vergt)orange(=orange)
ici pour le reservoir d'encre usage je ne sais pas si cest la même manip que vous avez fait dans le temp
Canon S900, S820, S750, S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
cordialement
Sussi
Fehlercodes beim S900
blink count Error Condition
2 orange /1x grün Paper Feed error
3 orange /1x grün Paper Jam
4 orange /1x grün No Ink error
5 orange /1x grün Cable cover error
6 orange /1x grün NO BJ Cartridge
Druckkopf ersetzen
7 orange /1x grün BJ Cartridge temperature error
Druckkopf ersetzen
8 orange /1x grün Waste Ink warning
Ink Absorber ersetzen
2 orange / grün abwechselnd, dann 1x lang grün CR error - SERVICE, Carriage Encoder Signal konnte nicht gelesen werden - versuchen Sie zuerst den halbtransparenten Plastikstreifen im Inneren des Druckers zu reinigen.
3 orange / grün abwechselnd, dann 1x lang grün LF error
4 orange / grün abwechselnd, dann 1x lang grün Purge Sensor error
6 orange / grün abwechselnd, dann 1x lang grün abnormal internal temperature, meistens defekte Hauptelektronik
7 orange / grün abwechselnd, dann 1x lang grün Waste ink full error, Ink Absorber voll
Ink Absorber ersetzen
8 orange / grün abwechselnd, dann 1x lang grün abnormal Head temperature
Druckkopf ersetzen
9 orange / grün abwechselnd, dann 1x lang grün EEPROM error - Hauptplatine defekt
10 orange / grün abwechselnd, dann 1x lang grün ROM error - Hauptplatine defekt
11 orange / grün abwechselnd, dann 1x lang grün RAM error - Hauptplatine defekt
orange/grünes Dauerblinken RAM error - Hauptplatine defekt
Es wird zwischen orange blinken und toggles unterschieden.
Der Unterschied dabei ist, dass "normale" Fehlercodes durch mehrfaches orange blinken angezeigt werden, und abschließend durch einmaliges längeres grün beendet werden. Anschließend beginnt der Code von vorne.
Beispiel: orange, orange, orange, grün, orange, orange, orange, grün ist der Fehlercode 3x orange.
Die schwerwiegenden Fehlercodes werden durch toggles angezeigt, dabei blinkt der Drucker im Rythmus orange / grün, der Fehlercode wird dann wieder durch ein längeres grün abgeschlossen, und beginnt dann wieder von vorne. Jedes orange/grün zählt dabei als 1 toggle.
Beispiel: orange, grün, orange, grün, grün, orange, grün, orange, grün, grün ist der Fehlercode 2 toggles orange / grün...
COPYRIGHT (C) BY WWW.HELPDESC.DE - IHREM CANON SPEZIALISTEN
je sais cest en allemand mais grün(=vergt)orange(=orange)
ici pour le reservoir d'encre usage je ne sais pas si cest la même manip que vous avez fait dans le temp
Canon S900, S820, S750, S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
cordialement
Sussi
4 nov. 2008 à 11:22
Malheureusement, je ne sais toujours pas quoi faire...