6 réponses
Well, I can get both i-solutions to work on it, but I have to make the contests work with my table!
But I don't quite understand your problem?
But I don't quite understand your problem?
Hi there
have you set your DMX addresses on the projectors?
if not, it won't work ^^
if you need advice, just send me an email ;)
Bye Léo
have you set your DMX addresses on the projectors?
if not, it won't work ^^
if you need advice, just send me an email ;)
Bye Léo
Hello and thank you Léo
Yes, with a lighting buddy, we have correctly set the addresses (1, 6, 11)
My LED bars have 5 channels. What's annoying is that the brand of the projectors is not in what's called the scan library editor. I have to create them myself for them to be in the software, and I don’t quite understand how to do it!
Do you know the software PC Director 512?
Thanks in advance
Patrick
Yes, with a lighting buddy, we have correctly set the addresses (1, 6, 11)
My LED bars have 5 channels. What's annoying is that the brand of the projectors is not in what's called the scan library editor. I have to create them myself for them to be in the software, and I don’t quite understand how to do it!
Do you know the software PC Director 512?
Thanks in advance
Patrick
Well, I know a bit about the log, so if you're interested, I can do the projections if you tell me exactly the composition of the channels ;)
I'll leave my email address: leo.037@hotmail.fr
Catch you later, bye
contact me by email
Léo
I'll leave my email address: leo.037@hotmail.fr
Catch you later, bye
contact me by email
Léo
Hi everyone,
I know PC Director and I've always appreciated its ease of use. For the problem at hand, maybe you should just check your cables; I had exactly the same issue with some Mac 250s and I checked my cables (which I had put together myself with 110 ohm and Neutrik connectors). There was just a loose connection and once I fixed it, everything worked. Maybe that's not the issue, but you should check anyway, a lot of problems like this come from a silly cause like the wiring.
I wish you good luck because it's really frustrating to have software and projectors that don't work!
I know PC Director and I've always appreciated its ease of use. For the problem at hand, maybe you should just check your cables; I had exactly the same issue with some Mac 250s and I checked my cables (which I had put together myself with 110 ohm and Neutrik connectors). There was just a loose connection and once I fixed it, everything worked. Maybe that's not the issue, but you should check anyway, a lot of problems like this come from a silly cause like the wiring.
I wish you good luck because it's really frustrating to have software and projectors that don't work!
Thank you for your message.
So there are now two of us struggling with our super sophisticated gear!!
Could a third person please help us out?
The so-called "smart" lights (mine is PAR_LED 56) are not receiving or responding to the information coming from the PC via the STAR-WAY DMX Elite interface.