View original (French)

Print spooler file not found

Solved
1664ben -  
 Hogalinette -
Hello,

My computer can no longer find the spooler file.

I have tried most of the steps indicated on the forum but none of them work.
When I am on "Computer Management/Services/Print Spooler" and I try to start it, a message indicates:
"Unable to start the Print Spooler service on Local Computer.
Error 2: the file is not found"

I can no longer install any printers and all those that were installed have disappeared.

Can you help me?

Thank you in advance
Configuration: Windows XP Internet Explorer 7.0

19 answers

Answer 1 / 19
nadet Posted messages 2 Status Member 4
 
SOS.. No more print spooler with VISTA. Could someone give me the solution.. please. Thank you.
4
Answer 2 / 19
1664ben
 
Thank you, but I had already done this manipulation without success.

However, since then I found the solution and I even recovered all my drivers.

The manipulation:

Start, Run, MSCONFIG.EXE (this opens the system configuration utility)
select "diagnostic startup", then OK and restart
The computer restarts and reopens the system configuration utility
reselect "normal startup", then OK and restart

and there you go
4
dal7338
 
Thank you very much for these instructions that work and especially for the clear explanations.
0
zoubed
 
Thank you very much! Your solution on msconfig worked!!!! I had tried the system tool, unsuccessfully!

Long live the internet!!!!
0
Hogalinette
 
13/01/2015....thank you! I had the same problem solved thanks to this manipulation on XP PRO SP3.
0
Answer 3 / 19
zedjiga
 
Hello
it's still my printer, it doesn't want to print. I don't know why. Please help me.
2
Answer 4 / 19
1664ben
 
RE,

I typed in "Run" "C:\WINDOWS\system32\spoolsv.exe" and the file cannot be found. Can I recover it from somewhere else?

Thank you.
1
Answer 5 / 19
menu65 Posted messages 5337 Status Member 354
 
Hi
you start by running the command services.msc

there you look for the spooler and activate it by setting it to automatic startup
1
Answer 6 / 19
zedjiga
 
BNJR. My printer is stuck. After installation, it printed a test page, and then it printed a half page, meaning it stops before finishing. I manually remove the sheet and it keeps blinking and doesn't print. Please help. Thank you.
1
Answer 7 / 19
menu65 Posted messages 5337 Status Member 354
 
OK, it is recognized by the system ?????

Did you try to solve the problem through the control panel ??????
Indeed, there is an integrated troubleshooting utility
--
A+
1
Answer 8 / 19
coolyn
 
Great solution, easy in no time. Thank you.
1
Answer 9 / 19
menu65 Posted messages 5337 Status Member 354
 
bravo 1664 ben
beer has its benefits
--
A+
0
Answer 10 / 19
zedjiga
 
I don't know how to do it.
0
Answer 11 / 19
menu65 Posted messages 5337 Status Member 354
 
Okay

You start it up, go to the Control Panel
on the right, switch it to classic view
then click on the printer and fax icon

there you should see your printer on the right, you have a troubleshooting utility
--
A+
0
Answer 12 / 19
zedjiga
 
The problem is that there is one document pending and it mentions deletion, and I can't cancel it.
0
Answer 13 / 19
menu65 Posted messages 5337 Status Member 354
 
If you have the drivers on a CD

you remove the printer and then you reboot

upon launching XP you will have "new hardware detected"

then you insert the CD and install

--
A+
0
Answer 14 / 19
zedjiga
 
It's done, I reinstalled but it stops in the middle, the sheet doesn't come out.
0
Answer 15 / 19
menu65 Posted messages 5337 Status Member 354
 
try this

on the printer in the control panel you right-click and then properties

and finally services and there you do the maintenance align the heads and all

after restart and try again
--
A+
0
Answer 16 / 19
zedjiga
 
I tried, it didn't work.
0
Answer 17 / 19
jennyced13
 
It's good, it worked for me too. The print spooler was disabled, but I couldn't find it in services. However, with the command Start => Run => services.msc, I searched for and activated the print spooler, and everything is working again. The printer installed and everything...
Thank you very much!
0
Answer 18 / 19
balise
 
Hello,

I also have the same issue, namely, "spooler file not found."

Did you resolve your issue, and if so, how?

Thank you in advance, best regards,
0
zedjiga
 
Good evening
. First of all, I analyzed my computer. Then I reinstalled my printer again after having uninstalled it, of course. You should try it too, and good luck. Let me know how it goes.
0
Zack
 
Hi,

I had the same problem and I solved it as follows.

Right-click on drive C: then search for spoolsv.exe

Copy the spoolsv.exe file to the c:\windows\system32 directory if it exists
(mine was located in c:\windows\system32\dllcache)

Best regards,

Zack!
0
sev > Zack
 
Thank you thank you thank you and a thousand thanks

I had been struggling for a week. Thanks to your advice, I succeeded; thank you again.
0
adine > Zack
 
Great! It worked after I struggled for quite a while... Thank you.
0
zedjiga > adine
 
You're welcome.
0
Answer 19 / 19
domochs Posted messages 14 Status Member 1
 
Hello,

I have tried all the manipulations you explained, including MSCONFIG.EXE, but it still doesn't work. My spooler remains missing. I also tried to repair my XP Pro SP3 version, but I couldn't do it, as at the beginning of the repair I got an error message saying "This version of XP cannot be upgraded" :-(
I really don't know what to do anymore... Can someone please help me?
Thank you very much in advance and have a nice day.
dom
-1
lol02
 
Same here, so if you finally found the solution, post it, you never know...
0
jamel
 
When I go to the Control Panel/Services, I can no longer find the Print Spooler.
0