Connecting Xpen artist 12 HDMI
jutoss
Posted messages
10
Status
Membre
-
Dr4gPi -
Dr4gPi -
Hello,
I was given an XPen Artist 12 graphics tablet for Christmas.
I connected it, installed the latest drivers available on their website, and indeed the recognition of the stylus works.
The problem lies with the display on the tablet's screen.
Since my PC doesn't have an HDMI port, I bought an HDMI to USB adapter and connected the device accordingly.
Despite this, when I turn on the tablet, it continues to display the message "No signal." When I open the software that comes with the drivers, I only have the choice between "full screen" or "monitor 1," whereas normally I should be able to set it to "monitor 2."
For your information, since I have neither USB nor HDMI on the screen, I connected the tablet to the tower.
Hoping you can help me, thank you in advance.
I was given an XPen Artist 12 graphics tablet for Christmas.
I connected it, installed the latest drivers available on their website, and indeed the recognition of the stylus works.
The problem lies with the display on the tablet's screen.
Since my PC doesn't have an HDMI port, I bought an HDMI to USB adapter and connected the device accordingly.
Despite this, when I turn on the tablet, it continues to display the message "No signal." When I open the software that comes with the drivers, I only have the choice between "full screen" or "monitor 1," whereas normally I should be able to set it to "monitor 2."
For your information, since I have neither USB nor HDMI on the screen, I connected the tablet to the tower.
Hoping you can help me, thank you in advance.
6 réponses
Hello, I also had a similar issue, and the solution was to buy a USB to HDMI adapter like this one (http://www.raycue.com/?product=usb-to-hdmi-adapter-usb-3-0-to-hdmi-hd-1080p-video-graphics-cable-adapter-converter-hdtv-tv-audio-video-adapter-compatible-with-windows-7810-pc-not-support-mac-black) and connect the HDMI from my tablet to the one on the adapter (after installing its driver from the merchant site). Now everything works! :) I hope this can help you.