Gigaset landline phone

Hello there,

NO PANIC! Well, a little bit anyway...

If your Gigaset displays BASE or BASE blinking, try pressing the call button. If there's no sound or input, try dialing 3103 and press the green button.
If there's no sound and nothing happens, it means your Gigaset is not connected to its base.

Gigaset base: connected to your box, the stand where you place the phone to charge. So, if you don't hear any sound and your base is properly connected,
Let me know:

Name of your box network (Free, SFR, Orange, Bouygues...) Your plan (Free revolution, Livebox Play, SFR Starter, Bbox Ultym...)
And if you don't understand anything, let me know too! ;)

Rafael, awaiting your response.

Surely you are right Bala, but personally I would have still tried ... just in case ...

Otherwise, there's the big game = factory reset but then you lose your contacts.


It's basically the same procedure on many Gigaset handsets.

In the user manual PDF of my device (A 510), apart from resetting the base, there isn't much information on this issue.

See you later . . .

--
There's no point in running; you have to leave on time . . .

Hello.

Or else >>>

See you . . .

--
There's no point in running; you have to leave on time . . .

Hello,
What model is this bigophone?
First, removing the batteries from the receiver and then putting them back in (be careful with the polarities) may be enough.
If not, you need to perform the manual pairing procedure described in the manual.

--

 Very difficult to catch a black cat in a dark room.
                                 Especially when it's not there...

We've lost Jung...

I have a gigaset trio, they show base and nothing works