Connect to the TP-Link TL-SG 105 switch interface?
Solved
D4_mi
Posted messages
4
Registration date
Status
Member
Last intervention
-
brupala Posted messages 111109 Registration date Status Member Last intervention -
brupala Posted messages 111109 Registration date Status Member Last intervention -
Hello,
[ TP Link TL-SG 105 version 2.1 ]
I have connected my first RJ45 from my Livebox to port 1 of the TP LINK TL-SG 105 switch, then I connected an RJ45 to port 2 to have a connection, and it works. I connected my Orange TV decoder and the TV does not work, so I read that I needed to create VLANs, but I cannot access the switch via the Easy Smart Configuration Software. Here is the error message (no switch exists in the local area network!). I tried different connections with the switch, but nothing works. (I also configured a fixed IP and disabled my firewall.)
Best regards.
[ TP Link TL-SG 105 version 2.1 ]
I have connected my first RJ45 from my Livebox to port 1 of the TP LINK TL-SG 105 switch, then I connected an RJ45 to port 2 to have a connection, and it works. I connected my Orange TV decoder and the TV does not work, so I read that I needed to create VLANs, but I cannot access the switch via the Easy Smart Configuration Software. Here is the error message (no switch exists in the local area network!). I tried different connections with the switch, but nothing works. (I also configured a fixed IP and disabled my firewall.)
Best regards.
I prefer that,
the VLAN for the TV box must not be present on other ports.