(PROBLEME D'IMPRIMANTE) Epson stylus c48

bjr toute le monde je cherche un flash impriamnte epson stylus sx 100 series. merci d'avance toute le monde

J'ai résolu un problème comme le tien, ce week-end, avec mon imprimante C46

Epson donne pour chaque modèle de machine, un nombre maxi de copies.
Pour la C46, j'ai constaté que c'était 3800 copies.
Ma machine s'est bloquée à 3801, avec les deux leds clignotant alternativement, avec le message dans statut monitor 'Des éléments de l'imprimante sont arrivés au terme de leur durée de vie" comme toi. Ce message est faux, car j'ai remis ma machine en route, hier, avec textes et photos.....
Effectivement il faut remettre ce compteur copie à Zéro.
J'ai téléchargé du site http://www.ssclg.com/epson.shtml le programme SSCutility ( c'est gratuit) en choissant la bonne série de l’imprimante à réparer.

Après téléchargement et ouverture du programme SSC service Utility, il faut fermer ce programme pour obtenir une icône près de l'horloge (un dessin d'imprimante colorée).
(point 1)en cliquant sur cette icone avec le coté droit de la souris,différents choix sont proposés, dont "Protection counter" Pointer la souris sur ce choix et cliquer sur "Show current value"
A ce moment on obtient l'information "current value" avec un nombre de copies effectuées"
et "maximum value" sans doute avec 3800
Si le nombre indiqué dans "current value est supérieur, sans doute 3801", cela prouve que le problème est bien le nombre de copies.
A ce moment, en choisissant encore "Protection counter" tapez sur "Reset protection counter"puis aussi "Clear Counteroverflow"

et revenir au point 1 ci-dessus, la "current value" devrait indiquer à zéro.
Si c'est le cas; le problème est résolu. Il reste à fermer le Pc et à le relancer.
Pour plus de sûreté, j'avais désinstallé le pilote de la C46 et je l'avais réinstallé. Ce n'est peut-être pas nécessaire.
Ce processus semble identique pour tous les modèles Epson et le programme SSC utility répond à un grand nombre de machines Epson
SSC Service Utility
for Epson Stylus Printers.
sur site : http://www.ssclg.com/epsone.shtml
Russian version
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!
Latest versions changes:
New in 4.20:
- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes
New in 4.10:
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes
New in 4.00:
- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes
Full version history is in the help file included in distribution.
Supported printer models >>>
Please, read all instructions in help file before doing anything with Your printer!
Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !
Program screenshots:

This menu can be accessed by right clicking on the application icon located in tray.

NOTE!
1) This is freeware project, so it is illegal to take money for this software.
2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sites is prohibited!
(с) 2002-2006 SSC Localization Group
Send your test reports and support requests (with reports) to this e-mail
You can discuss software in this forum.
________________________________________
End user agreement
1) This software is provided "as is" without any express or implied warranty of any kind including, without
limitation, warranties of merchantability, non-infringement or fitness for any particular purpose.
2) You are liable for all risks in relation to the quality or performance of this software. In no event shall SSC Localization Group or personally, author of this software, be liable for any damages whatsoever caused to you or the third party arising out of the use or inability to use this software. Damages include general damages, special damages, accidental damages or consequential damages (including, without limitation, loss of data or accuracy or unfitting interface for other programs, or problems with peripheral equipment).
2) You understand the risk of whole head or individual nozzles clogging in case of tardy replacing of empty cartridges, as well as risk of using hot swapping function (this inlude frequently cartridges replacement, or wrong deblocking of parking head on some models). You understand, that resetting the ink level counters or using ink freezer function implies responsibility to carefully watch ink levels in all cartridges and timely (as soon as You see any raw white bands, even in one color) replace cardridge.

J'ai résolu un problème comme le tien, ce week-end, avec mon imprimante C46

Epson donne pour chaque modèle de machine, un nombre maxi de copies.
Pour la C46, j'ai constaté que c'était 8300 copies.
Ma machine s'est bloquée à 8301, avec les deux leds clignotant alternativement, avec le message dans statut monitor 'Des éléments de l'imprimante sont arrivés au terme de leur durée de vie" comme toi. Ce message est faux, car j'ai remis ma machine en route, hier, avec textes et photos.....
Effectivement il faut remettre ce compteur copie à Zéro.
J'ai téléchargé du site http://www.ssclg.com/epson.shtml le programme SSCutility ( c'est gratuit) en choissant la bonne série de l’imprimante à réparer.

Après téléchargement et ouverture du programme SSC service Utility, il faut fermer ce programme pour obtenir une icône près de l'horloge (un dessin d'imprimante colorée).
(point 1)en cliquant sur cette icone avec le coté droit de la souris,différents choix sont proposés, dont "Protection counter" Pointer la souris sur ce choix et cliquer sur "Show current value"
A ce moment on obtient l'information "current value" avec un nombre de copies effectuées"
et "maximum value" sans doute avec 3800
Si le nombre indiqué dans "current value est supérieur, sans doute 3801", cela prouve que le problème est bien le nombre de copies.
A ce moment, en choisissant encore "Protection counter" tapez sur "Reset protection counter"puis aussi "Clear Counteroverflow"

et revenir au point 1 ci-dessus, la "current value" devrait indiquer à zéro.
Si c'est le cas; le problème est résolu. Il reste à fermer le Pc et à le relancer.
Pour plus de sûreté, j'avais désinstallé le pilote de la C46 et je l'avais réinstallé. Ce n'est peut-être pas nécessaire.
Ce processus semble identique pour tous les modèles Epson et le programme SSC utility répond à un grand nombre de machines Epson
SSC Service Utility
for Epson Stylus Printers.
sur site : http://www.ssclg.com/epsone.shtml
Russian version
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!
Latest versions changes:
New in 4.20:
- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes
New in 4.10:
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes
New in 4.00:
- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes
Full version history is in the help file included in distribution.
Supported printer models >>>
Please, read all instructions in help file before doing anything with Your printer!
Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !
Program screenshots:

This menu can be accessed by right clicking on the application icon located in tray.

NOTE!
1) This is freeware project, so it is illegal to take money for this software.
2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sites is prohibited!
(с) 2002-2006 SSC Localization Group
Send your test reports and support requests (with reports) to this e-mail
You can discuss software in this forum.
________________________________________
End user agreement
1) This software is provided "as is" without any express or implied warranty of any kind including, without
limitation, warranties of merchantability, non-infringement or fitness for any particular purpose.
2) You are liable for all risks in relation to the quality or performance of this software. In no event shall SSC Localization Group or personally, author of this software, be liable for any damages whatsoever caused to you or the third party arising out of the use or inability to use this software. Damages include general damages, special damages, accidental damages or consequential damages (including, without limitation, loss of data or accuracy or unfitting interface for other programs, or problems with peripheral equipment).
2) You understand the risk of whole head or individual nozzles clogging in case of tardy replacing of empty cartridges, as well as risk of using hot swapping function (this inlude frequently cartridges replacement, or wrong deblocking of parking head on some models). You understand, that resetting the ink level counters or using ink freezer function implies responsibility to carefully watch ink levels in all cartridges and timely (as soon as You see any raw white bands, even in one color) replace cardridge.


Bonne chance