A voir également:
- Probléme commande
- Invite de commande - Guide
- Commande terminal mac - Guide
- Commande dism - Guide
- Diskpart commande - Guide
- Commande scannow - Guide
3 réponses
Bonjour,
L'IOS qui est installé sur ton routeur ne doit pas supporter l'IPSEC. Peux-tu nous retourner le résultat de la commande :
routeur#show version
?
L'IOS qui est installé sur ton routeur ne doit pas supporter l'IPSEC. Peux-tu nous retourner le résultat de la commande :
routeur#show version
?
ci-dessus le sh version .
active#sh version
Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(16a), RELEASE S OFTWARE (fc2)
Technical Support: https://www.cisco.com/c/en/us/support/index.html
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 10-Sep-07 10:27 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
active uptime is 6 weeks, 5 days, 55 minutes
System returned to ROM by power-on
System image file is "flash:c2801-ipbase-mz.124-16a.bin"
Cisco 2801 (revision 7.0) with 113664K/17408K bytes of memory.
Processor board ID FCZ114093QT
2 FastEthernet interfaces
5 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
active#sh version
Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(16a), RELEASE S OFTWARE (fc2)
Technical Support: https://www.cisco.com/c/en/us/support/index.html
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 10-Sep-07 10:27 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
active uptime is 6 weeks, 5 days, 55 minutes
System returned to ROM by power-on
System image file is "flash:c2801-ipbase-mz.124-16a.bin"
Cisco 2801 (revision 7.0) with 113664K/17408K bytes of memory.
Processor board ID FCZ114093QT
2 FastEthernet interfaces
5 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102