View original (French)

Problem with the post in my 206

kevin57510 Posted messages 14 Status Membre -  
kevin57510 Posted messages 14 Status Membre -
Hello, I hope you can help me =). I have already searched the site and haven't found a solution to my problem... So I own a 206 1.6l 110hp HDi FAP from 2006, and I installed a Pioneer car radio that is compatible with my car, but when I turn off my car and remove the key, the radio stays on, and when I turn on my car or put the ignition on, the radio stays off. I have to turn it on and off manually, which is quite annoying, so I went to "Feu Vert" and they sold me a polarity inverter, and with that, I get no sound anymore... and I still have my issue, so they told me it was because of the multiplexing in the car... the radio turns off by itself after 2 minutes... anyway, not a very satisfying answer. So I went to "Peugeot," and they also sold me a "polarity inverter," and it still doesn't work =s I still have the same issue... They don’t understand; for them, it should work with a "polarity inverter." What to do? Thanks in advance =)

Configuration: Windows 7 / Firefox 3.6.10

6 réponses

Réponse 1 / 6
pichoum
 
Hello, did you get it new?
0
Réponse 2 / 6
kevin57510 Posted messages 14 Status Membre
 
The car, no, there's the JBL kit inside... and the radio is brand new.
0
pitchoum
 
Well, they messed up the original wiring; the contact is lit without damaging the car. When the contact is on, the stereo turns on, when the contact is off, the stereo turns off. What does the kit include?
0
Réponse 3 / 6
kevin57510 Posted messages 14 Status Membre
 
Well, I don't know... I bought the car used from Peugeot... How can I fix the issue?
0
pitchoum
 
On the contact key, cut the 3 wires, then connect it to one of the wires and turn the key until you get what you want.
0
Réponse 4 / 6
kevin57510 Posted messages 14 Status Membre
 
Could you be a little more specific please? I'd like to avoid messing things up and I don't know where I should tinker with this.
0
Réponse 5 / 6
kevin57510 Posted messages 14 Status Membre
 
Can you tell me the color of the wires? Or can you tell me where I can find out which wires? Please.
0
Réponse 6 / 6
pichoum
 
You can't screw things up; just connect the wire to one of the three terminals and turn it on to see if it works. If it doesn't, try another one. Nothing will burn; what don't you understand?
-1