View original (French)

Error code e 2 7 Canon MP 150 printer

joce -  
mariehel974 Posted messages 3 Status Member -
Hello,

I'm going crazy !!!!! I need to print and I keep getting an error code on my printer E 2 then 7 and it just loops over and over E 2 7. Can someone shed some light on this for me, I can't take it anymore .......
Thanks in advance.
Joce

Configuration: Windows Vista / Internet Explorer 7.0

3 answers

  1.
    jmarion3 Posted messages 49498 Registration date   Status Contributor Last intervention   5 512
     
    Hello;
    Before going "Crazy", check this link (towards the middle of the page MP150 with error codes and solutions)
    Please let me know the result
    http://imprimante-en-question.blogspot.com/search/label/Canon%20pixma

    To unlock error E27:

    Error E27, the ink absorber is full. To reset the counters:

    1- Turn off the printer.
    2- Press "Power" and at the same time "Stop/Reset".
    3- Release "Stop/Reset" and press it twice again.
    4- Release both buttons.
    5- When the "on/off" lights are green, press "Stop/Reset" 4 times.
    6- Turn off the printer and turn it back on.

    Next:

    - Open the printer.
    2- Locate the absorber, it is the spongy tab located under the axis where the cartridges move. If you touch it with your fingers, the ink will stain you. So there is no possibility of error.
    The ink deposits on this absorber and solidifies. It can no longer pass through this sponge.
    3- Take cotton swabs, dip them in distilled water and clean the absorber.

    Best regards
    14
  2. mariehel974 Posted messages 3 Status Member 1
     
    Thank you Yann 31
    it's mariehel974
    regarding my Pixma MP 140 printer error 27
    I have performed several manipulations based on the recommendations given
    but in vain
    thank you anyway for your response
    mariehel974
    1
  3. mariehel974 Posted messages 3 Status Member 1
     
    Hello Joce
    I have the same problems as you with my printer
    Error 27 is displayed
    I can't move forward
    Thank you
    0