C000 error appears on Canon MP 640 printer
Solved
Ettenouma
Posted messages
2
Status
Member
-
Bellus -
Bellus -
What to do?
It seems that I will have to "reset" it.
How to do it?
This happened while I was supposed to replace the large black ink cartridge
and while waiting for my ink package to arrive, despite the message
to change the ink, I made a copy on the printer by pressing OK,
it was an important certificate that I needed for the next day. I got the copy.
Yes, but now I need to get rid of the C000 printer error.
I unplugged the power supply and the other cable as well, and when I turned it back on, there were no changes. The green and orange lights are blinking simultaneously all the time.
I tried pressing the button on the top right (circle and triangle inside a red drawing) while holding down the color button for 25 seconds.
To no avail.
Thank you for any information you may have,
It seems that I will have to "reset" it.
How to do it?
This happened while I was supposed to replace the large black ink cartridge
and while waiting for my ink package to arrive, despite the message
to change the ink, I made a copy on the printer by pressing OK,
it was an important certificate that I needed for the next day. I got the copy.
Yes, but now I need to get rid of the C000 printer error.
I unplugged the power supply and the other cable as well, and when I turned it back on, there were no changes. The green and orange lights are blinking simultaneously all the time.
I tried pressing the button on the top right (circle and triangle inside a red drawing) while holding down the color button for 25 seconds.
To no avail.
Thank you for any information you may have,
3 answers
-
The problem is solved.
Thank you very much for paying attention to my request.
I really appreciated coming across this page:
http://imprimante-en-question.blogspot.com/2009/01/les-codes-d-erreur-par-imprimantes.html
and the link that you provided.
Thank you, I understand that you also searched.
I understood that this code had to do with a hardware issue,
something improperly placed, or something is obstructing.
"Anonymous said...
hello I have the same problem my carriage gets stuck on the right and cannot go back into the housing"
I inspected my Canon MP640 printer, I pushed the carriage and it sank down
so it was not properly placed.
What a pleasure!
Thank you for the access to this forum, thank you for the help received.
So the problem is resolved.
