View original (French)

Canon MP 220 paper loading issue!

Solved
stellatrek Posted messages 4 Status Member -  
 Moka -
I have a Canon MP 220 printer that has been working perfectly for several years!
However, for the past few days, I have been unable to print; the paper no longer feeds!
I haven't touched anything!
The first sheet is caught just on the lower right for a few millimeters and then it goes skewed and gets jammed!
What could be the problem?

4 answers

  1. Anonymous user
     
    Hello
    check if there is anything on the paper feed rollers. Feel free to turn it over and tap it.
    2
    1. stellatrek
       
      It works!
      Thank you, ronin!
      0
    2. Anonymous user
       
      Okay. Just shows that a little slap can be invigorating. LOL. Have a good evening.
      0
    3. john
       
      Good evening

      thank you for your response; I took a close look at the rolls and found my USB key that I had misplaced for several months...
      result: printer repaired and USB key found.
      0
    4. Moka
       
      Thank you, a good slap and a marker came out, it works perfectly now.
      0
  3. tgvdu45
     
    Hello,

    I have the same issue with my MP220, the same symptoms.
    I have gone through the "maintenance" mode of my printer, performed the "lower plate cleaning" and "roller cleaning" modes without any problem, the sheet passed fine. But as soon as I start printing from my PC, or print a test page from the printer, the sheet is only pulled from the right side and it prints "in the void" before displaying a "paper jam" message...

    If anyone has a tip...
    0
    1. stella
       
      maybe do like me, shake it a bit upside down to dislodge a piece of paper stuck that I couldn't see.
      it's really annoying when it doesn't work!
      0
    2. tgvdu45
       
      Indeed it works, an unknown body had slipped inside. Nevertheless, it worked well during the cleaning modes (well, some of them), who knows... Thank you Stella!
      0
    3. stella
       
      Glad to help you, and thanks especially to Ronin for his advice!
      0
  4. hermès
     
    Hello,
    I had the same problem with my Canon i865: paper getting stuck and printing nothing. After several cleanings of the rollers (by pressing the resume button until it blinks 3 times), and using compressed air to remove dust, nothing worked, I even tried slapping it. Until today when, thanks to your posted messages, I continued to search and found the object that was blocking it: a rubber band. Thank you!
    0