View original (French)

Réinstaller Windows 7 sur eMachines avec un CD de restauration

nones6 Posted messages 4 Status Member -  
yapi973 Posted messages 1 Status Member -
Hello,

I have an emachines E430 laptop running Windows 7.
Due to numerous unexpected shutdowns, I want to format and reinstall Windows 7 to start from scratch and then update the drivers on the emachines website.

The problem is that I can't launch the CD and the procedure.
I want to use the recovery DVD that I made at the beginning.
Does anyone know it?
Thanks a lot.

1 answer

  1.
    cyborg66 Posted messages 1 Status Member 3
     
    Hi, I’m not sure if you’ve found the solution to your problem, but I had the same issue with an eMachines G725. Here are the results of my research: contrary to what some say, for eMachines, to access the hidden partition used to restore the machine to factory settings, hold down the ALT GR key and press F10 a few times. There you go, look at this beautiful screen waiting for your decision. Do this and let me know how it goes.
    MAKE SURE TO KEEP THE ALT GR KEY (at the bottom right of the spacebar) pressed and tap F10. Isn’t it great? Also, put in your restoration CD, DVD 1, it will ask for DVD 2 later. See you!
    3
    1. Wilbiz972
       
      Cyborg66, I want to thank you because thanks to you I was able to start my restoration CD. "Maintain ALTG-GR and press the F10 key." I have an Emachine E430 and it works.. a thousand thanks.
      0
    2. yapi973 Posted messages 1 Status Member
       
      Hi,
      I also have an Emachines E430 PC and I would like to restore my system to the factory settings.
      However, when I bought my PC, I did not receive any installation CDs, etc...
      And I can't seem to download the right software suitable for my Emachines E430 computer??
      So if someone could help me as soon as possible, that would be great :)

      Thank youuuuuu ;)
      0