Black bar around the screen with HDMI cable
Solved
ge
-
jpm -
jpm -
Hello,
I installed an HDMI cable between the PC and the screen, and although it displays the correct resolution of 1920x1080, I find myself with a screen cut off by about 3cm all around.
Is there a solution, or do I need to go back to the DVI cable?
Thank you for any answers and solutions if there are any.
Gérard
I installed an HDMI cable between the PC and the screen, and although it displays the correct resolution of 1920x1080, I find myself with a screen cut off by about 3cm all around.
Is there a solution, or do I need to go back to the DVI cable?
Thank you for any answers and solutions if there are any.
Gérard
Configuration: Windows 7 / Firefox 3.6
10 réponses
Solution found:
Open the Catalyst Control Center
Click on:
- "Graphics"
- "Desktops & Displays"
- Right-click on the screen on the small bar at the bottom (not the large one in the center) if you have multiple screens, select the one that is causing issues.
- Select "Configure..."
- Then look for the "Scaling Options" icon and click on it
- Set the slider to 0% (Overscan) to properly adjust the screen.
Open the Catalyst Control Center
Click on:
- "Graphics"
- "Desktops & Displays"
- Right-click on the screen on the small bar at the bottom (not the large one in the center) if you have multiple screens, select the one that is causing issues.
- Select "Configure..."
- Then look for the "Scaling Options" icon and click on it
- Set the slider to 0% (Overscan) to properly adjust the screen.
nima
Thank you very much for the advice.
piero
Thank you, I had the same problem.