View original (French)

Problem with a Denon AVR 1804

Samoss99 Posted messages 2 Status Member -  
 michel -
Hello,
I have a little problem with my Denon AVR 1804 home theater system. While connecting the speakers at the back of the Denon, I accidentally touched a screwdriver while I had forgotten to turn off the power, and then pfffft nothing, I have no display in front, no sound, nothing, just the power button light still turns on.
So is there anyone who could tell me if this is serious and what I should do to avoid it costing me an arm and a leg? Thank you in advance.

3 answers

  1. gilles
     
    Hello.
    I had the same problem.
    You need to reset the Denon processor.
    Press both speaker A and B simultaneously while plugging in the power cord.
    It works for me.
    Best regards
    9
    1. michel
       
      Thank you.
      I had the same issue. With the amplifier turned off, just press speaker A and B at the same time and then
      turn the amplifier back on.
      1
    2. michel
       
      Report Edit Comment on Michel's response


      Michel - May 3, 2018 at 3:25 PM

      Thank you.
      I had the same problem. With the amplifier off, you just need to press both speaker A and B at the same time and then turn the amplifier back on.
      0
  2. charles05
     
    check the fuse...

    otherwise everything's broken, I think...
    0
  3. Samoss99 Posted messages 2 Status Member
     
    J'ai trouvé un fusible en bon état, mais peut-être qu'il y en a d'autres, je ne les ai pas trouvés.
    0