Refill Epson SX205 printer ink

To make your charger accessible, you need to:

1/ have the printer turned on (green light on)
2/ have the green light blinking next to the color (which means you need to change an ink cartridge)

here's what you need to do next:

1/ lift the scanner lid
2/ press and hold the stop button (red triangle, it's the 2nd one located just below the "On" button) for a few seconds

you will notice that the charger moves to the left and locks to the left of the accessible space

don't panic, that's normal

You need to press the "stop" button a second time and this time the charger, as if by magic, positions itself exactly in the center of the access hatch..

You change your cartridges
You lower the scanner drawer
You press the "stop" button once more and you're done
and you thank me, good luck

Hello my Felixou!

Hey, that's how it works.

p.s.: I have an EPSON printer......

We are indeed talking about replacing the cartridges. (Not to check the ink level). You need to open the cover and replace the old cartridges with new ones. (Not everything can be done through the software).
--
Felix like a feline, agile like me

Except that to replace the cartridges, you need to be able to access them, and they are parked behind a non-accessible and non-removable cover.
To access the cartridges for replacement, you need to go through the STATUS MONITOR software, which will instruct the printer head to move to a central position in order to access the cartridges and change them.