Mouse keeps disconnecting constantly.
Solved
syntheticm
Posted messages
436
Status
Membre
-
Gisma -
Gisma -
Hello,
I have an issue with my Revoltek Fightmouse Pro
(https://www.materiel.net/souris-pc/l480/
It keeps disconnecting and reconnecting nonstop (I hear the Windows sound). Since it's only a few months old, I initially thought it might be a USB port problem. Additionally, I had a similar issue with my old Advance mouse.
However, during testing, it turns out that all my other USB devices are functioning fine.
I then unboxed my old mouse and started testing! I noticed that the mice often got stuck when I lifted them high enough for the laser to lose contact (but not always). Later on, I understood that twisting the cable in a certain direction (the same direction for each mouse) would systematically disconnect them. However, when I leave them resting on the work surface without being jostled too much, they never disconnect.
So, I come to two conclusions:
- both of my mice have an identical fault (I find it hard to believe).
- the problem is indeed with the USB port. But if that's the case, I don't know what to do.
Any ideas, experiences, or solutions?
Thank you in advance.
--
Open Source is to computing what Bellevue is to kriek:
The more you taste it, the better it tastes.
I have an issue with my Revoltek Fightmouse Pro
(https://www.materiel.net/souris-pc/l480/
It keeps disconnecting and reconnecting nonstop (I hear the Windows sound). Since it's only a few months old, I initially thought it might be a USB port problem. Additionally, I had a similar issue with my old Advance mouse.
However, during testing, it turns out that all my other USB devices are functioning fine.
I then unboxed my old mouse and started testing! I noticed that the mice often got stuck when I lifted them high enough for the laser to lose contact (but not always). Later on, I understood that twisting the cable in a certain direction (the same direction for each mouse) would systematically disconnect them. However, when I leave them resting on the work surface without being jostled too much, they never disconnect.
So, I come to two conclusions:
- both of my mice have an identical fault (I find it hard to believe).
- the problem is indeed with the USB port. But if that's the case, I don't know what to do.
Any ideas, experiences, or solutions?
Thank you in advance.
--
Open Source is to computing what Bellevue is to kriek:
The more you taste it, the better it tastes.
12 answers
I found the solution to the problem.
1- Go to Device Manager by typing it in the search bar.
2- Go to Mice and other pointing devices and select the mouse.
3- Go to Power Management.
4- And finally disable the second option which says "Allow this device to wake the computer from sleep."
There you go, the problem is solved. :)
1- Go to Device Manager by typing it in the search bar.
2- Go to Mice and other pointing devices and select the mouse.
3- Go to Power Management.
4- And finally disable the second option which says "Allow this device to wake the computer from sleep."
There you go, the problem is solved. :)
Wikilane
I did that. But the problem persists.
LMenn
>
trucsdepro.fr
Me personally, nothing was working, so I hit my mouse against the desk and miraculously it worked perfectly.
