cisco packet tracerFermé

Question

Bonjour,
quel sont les principale commande pour packet tracer?

huricane · Accepted Answer

% Invalid input detected at '^' marker.
	
Switch(config)#%SYS-5-CONFIG_I: Configured from console by console
               ^
% Invalid input detected at '^' marker.
	
Switch(config)#interface vlan3
Switch(config-if)#switch
Switch(config-if)#exit
Switch(config)#vlan 4 name Users
                      ^
% Invalid input detected at '^' marker.
	
Switch(config)#vlan database
                    ^
% Invalid input detected at '^' marker.
	
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
  as VLAN database mode is being deprecated. Please consult user
  documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vlan 4 name Users
VLAN 4 modified:
    Name: Users
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#interface f0/6
Switch(config-if)#sw
Switch(config-if)#switchport acces vlan 4
Switch(config-if)#exit
Switch(config)#interface f0/5
Switch(config-if)#sw
Switch(config-if)#switchport acces vlan 4

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to downSwitch(config-if)#exit
Switch(config)#interface f0/4 
Switch(config-if)#sw
Switch(config-if)#switchport acces vlan 4
Switch(config-if)#

huricane · Answer

https://www.cisco.com/c/en/us/support/security/asa-5500-series-next-generation-firewalls/products-command-reference-list.html

un petit site regroupant les commande

huricane · Answer

kk sait fair els vlan?

huricane · Answer

^
% Invalid input detected at '^' marker.
	
Switch(config)#vlan admin
                    ^
% Invalid input detected at '^' marker.
	
Switch(config)#vlan database
                    ^
% Invalid input detected at '^' marker.
	
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
  as VLAN database mode is being deprecated. Please consult user
  documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#switchport access mode
             ^
% Invalid input detected at '^' marker.
	
Switch(vlan)#vlan 2 name admin
VLAN 2 modified:
    Name: admin
Switch(vlan)#no debug all
                ^
% Invalid input detected at '^' marker.
	
Switch(vlan)#vlan 2 name Admin
VLAN 2 modified:
    Name: Admin
Switch(vlan)#interface vlan2
             ^
% Invalid input detected at '^' marker.
	
Switch(vlan)#ip addr
Switch(vlan)#ip addr
             ^
% Invalid input detected at '^' marker.
	
Switch(vlan)#show vlan
             ^
% Invalid input detected at '^' marker.
	
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#show vlan

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23, Fa0/24
                                                Gig1/1, Gig1/2
2    Admin                            active    
3    compta                           active    
4    Users                            active    
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active    

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        0      0
2    enet  100002     1500  -      -      -        -    -        0      0
3    enet  100003     1500  -      -      -        -    -        0      0
4    enet  100004     1500  -      -      -        -    -        0      0
1002 enet  101002     1500  -      -      -        -    -        0      0
1003 enet  101003     1500  -      -      -        -    -        0      0
1004 enet  101004     1500  -      -      -        -    -        0      0
1005 enet  101005     1500  -      -      -        -    -        0      0

Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#vlan2 port 0/0
             ^
% Invalid input detected at '^' marker.
	
Switch#config admin
              ^
% Invalid input detected at '^' marker.
	
Switch#config vlan
              ^
% Invalid input detected at '^' marker.
	
Switch#
Switch#conf
Switch#configure vlan2
                 ^
% Invalid input detected at '^' marker.
	
Switch#conf
Switch#configure 2
                 ^
% Invalid input detected at '^' marker.
	
Switch#ip nat side
          ^
% Invalid input detected at '^' marker.
	
Switch#ip nat inside
          ^
% Invalid input detected at '^' marker.
	
Switch#database
Switch#database vlan
                ^
% Invalid input detected at '^' marker.
	
Switch#admin database
             ^
% Invalid input detected at '^' marker.
	
Switch#admin
Switch#admin 
Translating "admin"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address

Switch#
Switch#configure
Configuring from terminal, memory, or network [terminal]? t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#interface vlan
% Incomplete command.
Switch(config)#interface vlan2

%LINK-5-CHANGED: Interface Vlan2, changed state to upSwitch(config-if)#
Switch(config-if)#swit
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#exit
Switch(config)#interface f0/5
Switch(config-if)#sw
Switch(config-if)#switchport access vlan 2

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to upSwitch(config-if)#ip add
Switch(config-if)#ip add
Switch(config-if)#ip addresse
Switch(config-if)#ip addresse
                  ^
% Invalid input detected at '^' marker.
	
Switch(config-if)#ip add
Switch(config-if)#add
Switch(config-if)#add ip
                  ^
% Invalid input detected at '^' marker.
	
Switch(config-if)#exit
Switch(config)#interface 
Switch(config)#int
Switch(config)#interface f0/5
Switch(config-if)#ip addr
Switch(config-if)#ip ad
Switch(config-if)#ip ad
Switch(config-if)#ip ad
Switch(config-if)#exit
Switch(config)#interface vlan3

%LINK-5-CHANGED: Interface Vlan3, changed state to upSwitch(config-if)#sw
Switch(config-if)#swi
Switch(config-if)#swich
Switch(config-if)#swich
                   ^
% Invalid input detected at '^' marker.
	
Switch(config-if)#
%SYS-5-CONFIG_I: Configured from console by console
Switch#

Cisco packet tracer

4 réponses

Discussions similaires

Newsletters