A voir également:
- Pb avec imprimante canon mp170
- Canon lbp 2900 - Télécharger - Pilotes & Matériel
- Pilote wia canon - Télécharger - Pilotes & Matériel
- Comment scanner un document avec une imprimante - Guide
- Spouleur imprimante - Guide
- Imprimante hp en pause ✓ - Forum Imprimante
3 réponses
bonsoir leo essaie avec ça
The MPTool is designed for service works with the printer Canon MP-Series Low-Level mode at the moment are supported for MP150, MP160, MP170, MP180, MP450, MP460. MP150, MP160, MP170, MP180, MP450, MP460.
We can use this tool to reset ink counter black and colour. There are three modes in which printers can work Canon MP-series:
1. Normal
2. Service and
3. Low-level.
mptool_screen.jpg
Normal - a regime which is included in the normal printer.
Service - mode in which you can perform service operations with the buttons printer. To switch the printer Canon MP-series in the “Service” mode you:
1) Turn off the printer.
2) Press and hold the button lifting / resume printing.
3) Press and hold the button printer.
4) Release the button lifting / resume printing.
5) Double-click restoration / print.
6) Release button printer.
after that time will be flashing green LED (flashing time depends on the printer model), then it will go steadily and the printer will become the “Service” mode.
Low-Level - work intended for low-level operations with EEPROM printer, in this mode MPTool works with the printer. To switch the printer MP-Series Low-Level regime should:
1) Turn off the printer on the network.
2) Press and hold the button.
3) Add a printer to a network.
4) Click lifting / resume printing.
5) Release button.
[ Download MPTool ]
Recommended Links
Bon cest en anglais mais pas si complique
fais moi savoire tes results
cordialement
sussi
The MPTool is designed for service works with the printer Canon MP-Series Low-Level mode at the moment are supported for MP150, MP160, MP170, MP180, MP450, MP460. MP150, MP160, MP170, MP180, MP450, MP460.
We can use this tool to reset ink counter black and colour. There are three modes in which printers can work Canon MP-series:
1. Normal
2. Service and
3. Low-level.
mptool_screen.jpg
Normal - a regime which is included in the normal printer.
Service - mode in which you can perform service operations with the buttons printer. To switch the printer Canon MP-series in the “Service” mode you:
1) Turn off the printer.
2) Press and hold the button lifting / resume printing.
3) Press and hold the button printer.
4) Release the button lifting / resume printing.
5) Double-click restoration / print.
6) Release button printer.
after that time will be flashing green LED (flashing time depends on the printer model), then it will go steadily and the printer will become the “Service” mode.
Low-Level - work intended for low-level operations with EEPROM printer, in this mode MPTool works with the printer. To switch the printer MP-Series Low-Level regime should:
1) Turn off the printer on the network.
2) Press and hold the button.
3) Add a printer to a network.
4) Click lifting / resume printing.
5) Release button.
[ Download MPTool ]
Recommended Links
Bon cest en anglais mais pas si complique
fais moi savoire tes results
cordialement
sussi
Bonjour,
tout d'abord, je tiens à vous remercier pour votre réponse.
Etant donné que j'ai internet que le week end quand je rentre chez moi, je n'ai pas pu vous répondre plus tôt, j'en suis désolée.
Donc, j'ai essayé, le problème est que lorsque le message s'affiche, plus aucune autre fonction ne marche, c'est-à-dire que je peux appuyer sur n'importe quel bouton, plus rien ne fonctionne. Et si j'éteind l'imprimante puis la rallume, le message s'affiche tout de suite et ensuite plus rien à faire.
Voilà.
Cordialement.
tout d'abord, je tiens à vous remercier pour votre réponse.
Etant donné que j'ai internet que le week end quand je rentre chez moi, je n'ai pas pu vous répondre plus tôt, j'en suis désolée.
Donc, j'ai essayé, le problème est que lorsque le message s'affiche, plus aucune autre fonction ne marche, c'est-à-dire que je peux appuyer sur n'importe quel bouton, plus rien ne fonctionne. Et si j'éteind l'imprimante puis la rallume, le message s'affiche tout de suite et ensuite plus rien à faire.
Voilà.
Cordialement.
bon soir leo j'ai lu votre poste et je crois comprendre que vous essaiez d'apliquer la solution apres que le message s 'afiche. mais normalement l'imprim doit être etainte ou maime debranchée.apres vous apuiez sur le bouton d'alumage et ne le relachez que etape 5
desolé pour le français je sais c'est abominable
cordialement
SUSSI
desolé pour le français je sais c'est abominable
cordialement
SUSSI