Telemecanique connection via USB
Solved/Closed
papy52
-
TOM62490 -
TOM62490 -
Hello,
I have a TSCPCX 3030 cable (USB <-> RS 485), and I'm trying to connect to a TSX Micro, but I can't get my cable to work.
Windows XP SP3 recognizes the cable as an unknown device.
I tried installing the Telemechanique driver "Tsxpcx3030DeviceFiles.exe" as well as the "PLC USB Driver" from the Schneider driver manager, but with no positive results.
On the cable's casing, I am set to position 0 "TER Multi"
Anyway, I'm lost and I would appreciate any information.
Best regards,
Papy 52
I have a TSCPCX 3030 cable (USB <-> RS 485), and I'm trying to connect to a TSX Micro, but I can't get my cable to work.
Windows XP SP3 recognizes the cable as an unknown device.
I tried installing the Telemechanique driver "Tsxpcx3030DeviceFiles.exe" as well as the "PLC USB Driver" from the Schneider driver manager, but with no positive results.
On the cable's casing, I am set to position 0 "TER Multi"
Anyway, I'm lost and I would appreciate any information.
Best regards,
Papy 52
Configuration: Windows XP Firefox 2.0.0.14
4 réponses
I am looking for a telemechanique driver TSXCUSB485
I need a response as soon as possible
Best regards
lpeterluc
I need a response as soon as possible
Best regards
lpeterluc
Hello,
Next time, create a new topic with your question; you'll have a better chance of getting a response.
I took a quick look; it talks about the installation CD that is valid for different converters.
Do you have the CD? If so, go ahead and install it.
See the explanations.. (in English)
http://www.telemecanique.com/85256E540060850F/all/C125713F005265E2C12572280049C002/$File/35013735_k02_000_00.pdf
Catch you later
PS: Don't forget Google either
--
Experience teaches more surely than advice. (André Gide)
Next time, create a new topic with your question; you'll have a better chance of getting a response.
I took a quick look; it talks about the installation CD that is valid for different converters.
Do you have the CD? If so, go ahead and install it.
See the explanations.. (in English)
http://www.telemecanique.com/85256E540060850F/all/C125713F005265E2C12572280049C002/$File/35013735_k02_000_00.pdf
Catch you later
PS: Don't forget Google either
--
Experience teaches more surely than advice. (André Gide)
I finally just changed the cable because for the TSXPCX3030 cable, no one knows how to make it work under XP SP 2 and 3. I contacted Telemechanique, and I received a nice driver pack, but it didn’t change anything. So now I’m working with the TSXCUSB485 box and the TSXCRJMD25 cable (still via USB).
Thank you nonetheless for your help.
"Subject to Close"
Thank you nonetheless for your help.
"Subject to Close"
Hi everyone,
I'm looking for the pinout correspondence (from pin number to pin number) between the minidin-8 connector and the RJ45 of the TSXCRJMD25 cable from a Twido since the RJ45 got crushed under the foot of a careless colleague. Given how much it cost me, I'm a bit annoyed about having to buy another one. If someone could provide me with the pinout, it would be really cool.
Thanks and have a great day everyone.
I'm looking for the pinout correspondence (from pin number to pin number) between the minidin-8 connector and the RJ45 of the TSXCRJMD25 cable from a Twido since the RJ45 got crushed under the foot of a careless colleague. Given how much it cost me, I'm a bit annoyed about having to buy another one. If someone could provide me with the pinout, it would be really cool.
Thanks and have a great day everyone.
Sincerely,
Papy 52