STARSAT 4200 Positioning Config.
hmcirta
Posted messages
249
Registration date
Status
Member
Last intervention
-
Chaky -
Chaky -
Hello,
Having replaced my ASTON SIMBA 202 demo with a STARSAT 4200, I encountered the following problem:
The antenna, equipped with a positioner, was aimed at satellite A when the demo was changed.
The issue I have is as follows: The antenna doesn't rotate if I switch satellites. It's as if the positioner is not detected. The antenna positions itself on satellite A whether I choose a channel from satellite A or satellite B. Also, the signal level and quality indicated are the same for both satellites.
Knowing that I have checked both chosen satellites A and B in the satellite list (for example), and that the positioner is set to DiSEqC 1.2.
What settings do I need to make for my antenna to rotate?
I know it's a bit of a puzzle, but I hope I have been clear. I remain at your disposal for further explanations.
Thank you to those who will guide me.
NB: The positioner is not stuck as I can turn it with my old demo.
--
What is the use of knowledge if it is not shared
Having replaced my ASTON SIMBA 202 demo with a STARSAT 4200, I encountered the following problem:
The antenna, equipped with a positioner, was aimed at satellite A when the demo was changed.
The issue I have is as follows: The antenna doesn't rotate if I switch satellites. It's as if the positioner is not detected. The antenna positions itself on satellite A whether I choose a channel from satellite A or satellite B. Also, the signal level and quality indicated are the same for both satellites.
Knowing that I have checked both chosen satellites A and B in the satellite list (for example), and that the positioner is set to DiSEqC 1.2.
What settings do I need to make for my antenna to rotate?
I know it's a bit of a puzzle, but I hope I have been clear. I remain at your disposal for further explanations.
Thank you to those who will guide me.
NB: The positioner is not stuck as I can turn it with my old demo.
--
What is the use of knowledge if it is not shared
Configuration: Windows XP Internet Explorer 6.0
3 answers
-
Hello,
I am encountering an installation problem,
I changed my receiver by replacing an old Echostar with a Starsat 4000, the problem is that I don't know how to make it work with an already installed v box
What should I put in the antenna installation menu?
And in LNB config?
Can someone explain the procedure to save satellite positions
Thank you -
Hi
I was able to set up my demo with the positioner. I was able to record the position of 2 satellites, but I am not receiving a signal to lock onto the 3rd satellite (it detects the signal from one of the other 2 satellites).
Can someone help me please?
--
What is knowledge for if it is not shared? -
