View original (French)

Automatic brightness adjustment on Asus ProArt

Solved
Laudam -  
jeannets Posted messages 28401 Registration date   Status Contributor Last intervention   -
Hello,

Since I received my new Asus ProArt monitor, the brightness changes on its own depending on the windows or programs I use. As a photographer, this change is not suitable at all when it comes to photo editing!
I've disabled all automatic brightness adjustment settings but nothing works...
Do you have a solution? Thank you in advance.

Configuration: Windows / Chrome 91.0.4472.101

4 answers

  1.
    jeannets Posted messages 28401 Registration date   Status Contributor Last intervention   Ambassadeur 6 603
     
    Hello,

    What version of ProArt is it..?? PA32UCG for example..??

    There are also settings in the OSD screen menus

    Actually, it’s brand new, it has never worked..?? and what is the seller doing about it..??
    0
    1. Laudam
       
      This is the PA24AC version.
      When I received it, I immediately calibrated it with a probe.
      I don’t think it does that out of the box. Maybe there's a setting to check in the drivers or something?
      0
  2. Eliott
     
    You go to: settings→system→display→below the bar to adjust the brightness, there is the option:turn off automatic brightness.
    0
    1. Laudam
       
      Yes, thank you, but I've already done that. By the way, I don’t have the bar to adjust the brightness because I'm on a desktop PC and not a laptop…
      0
      1. Eliott > Laudam
         
        In that case, you need to go into your graphics card settings (often, there is a manufacturer's software, for example: if you have an Intel, you can go into the Intel graphics control software, which is my case). Check with your graphics card.
        Alternatively, your screen has a sensor and it decreases or increases the brightness by itself, so you need to go into your screen settings THROUGH your screen.
        0
      2. Laudam > Eliott
         
        So I actually went to the Nvidia control panel, but I didn't find anything for my problem :(
        As for the screen, I also looked in the settings, but again, I can't find anything about auto brightness or a sensor.
        0
  3. Laudam
     
    I found it!! It was indeed in the screen settings, in dynamic dimming.
    0
  4. jeannets Posted messages 28401 Registration date   Status Contributor Last intervention   Ambassadeur 6 603
     
    Here is the manual for this screen, in French
    https://dlcdnets.asus.com/pub/ASUS/LCD%20Monitors/PA24AC/PA24A_French.pdf

    It contains many fine adjustments and settings, not to mention those of Windows.

    For example: 
    When the blue light filter is activated, the default settings of the Standard Mode will be automatically imported. Between Level 1 and Level 3, the Brightness function is user-configurable.


    You can also reset it to the default settings for a new starting point for your personal settings.
    0