View original (French)

Internet splitter

Axel322 Posted messages 4 Status Member -  
Axel322 Posted messages 4 Status Member -
Hello,

I just moved in and in my electrical cabinet, I have a patch panel but I don't understand the connections to make

Configuration: Android / Chrome 87.0.4280.101

4 answers

  1.
    jee pee Posted messages 31889 Registration date   Status Moderator Last intervention   9 981
     
    Hello,

    If your box is connected to the black T-shaped socket to power the wall outlets in the apartment, you need to connect the 4 Ethernet outputs of the box to the 4 Ethernet sockets to the right of the DTI, using Ethernet cables.

    It will work if the sockets are not just wired with 2 wires out of the 8, which is sufficient for telephony but not for Ethernet, where we need all 8 wires of the cable.

    0
  2. Axel322 Posted messages 4 Status Member
     
    For now, my main box is connected to the DTI socket via RJ45 and gives me internet. From this DTI socket, a cable goes to the tn131 module, where 2 small wires are connected, and I think the 4 central modules are connected to the different RJ45 sockets in the house.
    But I can't manage to distribute the internet connection to the different rooms of the house where there are RJ45 sockets.
    0
    1. jee pee Posted messages 31889 Registration date   Status Moderator Last intervention   9 981
       
      bis: to power the wall sockets of the apartment, you need to connect the 4 Ethernet outputs of the box to the 4 Ethernet sockets to the right of the DTI, using Ethernet cables.
      0
    2. brupala Posted messages 111155 Registration date   Status Member Last intervention   14 451
       
      Hello,
      you need to forget about the TN131, it can only be used for the phone, not for ethernet, it's not a switch, just a telephone splitter.
      And do this:
      Hello,
      who is your fiber installer?
      going to stick the PTO behind the DIN rail when it should be attached to it, it's a real mess.
      Afterwards, as Jee pee explained well,
      you should do this:
      0
  3. Axel322 Posted messages 4 Status Member
     
    Alright, so I need to unplug the cable that goes from the DTI to the TN131 and it will work?
    0
    1. brupala Posted messages 111155 Registration date   Status Member Last intervention   14 451
       
      No, you leave that, forget the TN131, I told you.
      You connect the Ethernet ports of your box to the patch panels.
      0
  4. Axel322 Posted messages 4 Status Member
     
    Alright, thank you.
    0