Quel RAM choisir ?

Bonjour , je voudrais savoir quel RAM choisir sachant que mon dernier achat : https://www.crucial.fr/memory/ddr3/ct102464bf160b/ct6907405
Bien que compatible et reconnu par l'ordinateur, j'avais quand meme plein de BSOD(memory management) et de crash en jeu.
J'ai fait un memtest, j'avais plus de 1000 erreurs par passes. Je l'ai donc renvoyé a crucial.
Voici le rapport RAMmon :
Ram Type | DDR3 | Not Populated | Not Populated | Not Populated |
Maximum Clock Speed (MHz) | 800 (JEDEC) | | | |
Maximum Transfer Speed (MHz) | DDR3-1600 | | | |
Maximum Bandwidth (MB/s) | PC3-12800 | | | |
Memory Capacity (MB) | 2048 | | | |
Jedec Manufacture Name | SK Hynix | | | |
Search Amazon.com | Search! | | | |
SPD Revision | 1.3 | | | |
Registered | No | | | |
ECC | No | | | |
DIMM Slot # | 1 | | | |
Manufactured | Week 34 of Year 2014 | | | |
Module Part # | HMT425S6AFR6A-PB | | | |
Module Revision | 0x4E30 | | | |
Module Serial # | 0x3440619B | | | |
Module Manufacturing Location | 1 | | | |
# of Row Addressing Bits | 15 | | | |
# of Column Addressing Bits | 10 | | | |
# of Banks | 8 | | | |
# of Ranks | 1 | | | |
Device Width in Bits | 16 | | | |
Bus Width in Bits | 64 | | | |
Module Voltage | 1.5V, 1.35V | | | |
CAS Latencies Supported | 5 6 7 8 9 10 11 | | | |
Timings @ Max Frequency (JEDEC) | 11-11-11-28 | | | |
Maximum frequency (MHz) | 800 | | | |
Maximum Transfer Speed (MHz) | DDR3-1600 | | | |
Maximum Bandwidth (MB/s) | PC3-12800 | | | |
Minimum Clock Cycle Time, tCK (ns) | 1.250 | | | |
Minimum CAS Latency Time, tAA (ns) | 13.125 | | | |
Minimum RAS to CAS Delay, tRCD (ns) | 13.125 | | | |
Minimum Row Precharge Time, tRP (ns) | 13.125 | | | |
Minimum Active to Precharge Time, tRAS (ns) | 35.000 | | | |
Minimum Row Active to Row Active Delay, tRRD (ns) | 7.500 | | | |
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) | 48.125 | | | |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) | 260.000 | | | |
| | | | |
DDR3 Specific SPD Attributes | | | | |
Write Recovery Time, tWR (ns) | 15.000 | | | |
Internal Write to Read Command Delay, tWTR (ns) | 7.500 | | | |
Internal Read to Precharge Command Delay, tRTP (ns) | 7.500 | | | |
Minimum Four Activate Window Delay, tFAW (ns) | 40.000 | | | |
Maximum Activate Window in units of tREFI | 0 | | | |
RZQ / 6 Supported | Yes | | | |
RZQ / 7 Supported | Yes | | | |
DLL-Off Mode Supported | Yes | | | |
Maximum Operating Temperature Range (C) | 0-95 | | | |
Refresh Rate at Extended Operating Temperature Range | 2X | | | |
Auto-self Refresh Supported | No | | | |
On-die Thermal Sensor Readout Supported | No | | | |
Partial Array Self Refresh Supported | No | | | |
Thermal Sensor Present | No | | | |
Non-standard SDRAM Type | Standard Monolithic | | | |
Maxium Activate Count (MAC) | | | | |
Module Type | SO-DIMM | | | |
Module Height (mm) | 30 | | | |
Module Thickness (front), (mm) | 2 | | | |
Module Thickness (back), (mm) | 2 | | | |
Module Width (mm) | 67.6 | | | |
Reference Raw Card Used | Raw Card C Rev. 3 | | | |
DRAM Manufacture | SK Hynix | | | |

Merci de m'éclairer !