Hello everyone, here is my problem, when I listen to music with iTunes, a process appears that consumes a lot of resources to the point that the music stutters, especially when I pair it with Firefox (it also becomes slow) and even more so when I chat on WLM, it gets even worse... I reinstalled the latest driver for the graphics card but nothing works... I don't see where the problem could be, so I'm relying on you, if you can help me... thanks
I found the solution to the problem: Go to Control Panel, Sound, Speakers, Properties, Enhancements, Disable all sound effects...
tutu
It doesn't work for me.
soraya42
Posted messages14StatusMember
THAAAAAAAAAAAANK YOU SO MUCH !!!! I was on the verge of bringing my computer to customer service, I was surprised that my CPU usage was at 100€ when I have an Intel Core i3 and even just browsing the internet was a struggle... !
Well, here’s a simple but very dangerous solution... So step 1: ctrl+alt+delete 2: go to performance 3: click on resource monitor and in the first window, everything is explained, nothing to complain about, but these are all system programs to see who is using up all your power. Look in the last column for the average CPU usage; if there's one over 10%, right-click and stop the process, and the computer's power will return to normal. I do it and there are no problems, but be careful, I’m on Windows 7, so everything is pretty much the same except for the programs used, but theoretically, this should work, trust me ^^ P.S.: the process reactivates for me, at least every hour, so you have to remove it each time and never remove the ones with Windows 7, Windows Vista, or Windows XP in the name, those are the system ones, so remove those, the computer has to be restarted otherwise nothing will work ^^ that’s the only risk to take. Goodbye and good luck.
I have the same problem as you, or almost, for no particular reason, audiodg.exe starts to take up to 35% of the CPU, sometimes when I go to a particular site (while usually it doesn’t exceed 10). I wonder if this process might be subject to infection, spyware, or something else. Moreover, I care about my sound effects, so even though the procedure described above works, I’m not interested. Thank you very much, but without sound effects and with external speakers, it sounds terrible!! Despite my various diagnostics, no infections have ever been found in this folder. Does anyone have an idea?
Good evening jmp59, first of all, thank you for caring about my case. However, I don't really see the connection between my internet connection and my problem. I'm sorry, I still want to learn and I have to admit I'm left wanting. Can you give me more explanation? Because it's not the web pages that are slow, but rather a process that is slowing down my PC. Thank you.
You're not alone, don't worry... I have this problem too, ever since I installed Vista I can't play, not even CSS, that's it xD, so I'm open to any suggestions :)
Thanks
No-2
Posted messages49StatusMember12
Hi Dafyo, it feels good not to feel alone. I've searched the internet thoroughly, and I can't find enough information to answer our question... it's frustrating because if we knew our answer, we could solve our problem and share it with those who might have the same issue... but clearly, you're the only one who responded... we might not advance humanity, but at least we can solve our problem. See you!
Un des nouveaux composants audio dans Vista est un nouveau processus nommé audiodg.exe.
Si vous le regardez dans le gestionnaire des tâches, la description indique "Windows Audio Device Graph Isolation", mais cela n'aide pas vraiment à comprendre ce qu'il fait.
La réponse courte est qu'audiodg.exe héberge le moteur audio de Vista. Tous le DSP et autres traitements audio sont effectués dans audiodg.exe. Il y a deux raisons pour lesquelles il fonctionne en dehors du service audio Windows.
La première est qu'il y a du code tiers qui est chargé dans audiodg.exe. Les fournisseurs de matériel audio ont la possibilité d'installer des DSP personnalisés (appelés Audio Processing Objects ou APOs) dans le pipeline audio. Pour un certain nombre de raisons (fiabilité, maintenabilité, autres), nous ne sommes pas autorisés à charger du code tiers dans les processus svchost (svchost.exe est un processus hôte générique pour les services utilisé dans Windows). Nous devons donc déplacer tout le code qui interagit avec ces APOs tiers en dehors du service audio (de cette façon, si un APO plante, il ne fera pas tomber une autre partie critique du système avec lui).
La deuxième raison d'utiliser un processus séparé pour le moteur audio est le DRM. Le système DRM dans Vista exige que les échantillons audio soient traités dans un processus protégé, et (pour un certain nombre de raisons techniques qui sont trop obscures à expliquer) il n'est pas possible pour un service hébergé par svchost de s'exécuter dans un processus protégé. Alors pourquoi audiodg? Comme je l'ai mentionné dans mon post "Audio dans Vista, La Big Picture", le chemin que prennent les échantillons audio à travers le moteur audio peut être considéré comme un graphe dirigé. En interne, nous appelons ce graphe "Audio Device Graph" (ok, techniquement, nous appelons la partie à gauche du mélangeur le graphe local, et la partie à droite du mélangeur le graphe des appareils, mais lorsque nous considérons le tableau d'ensemble, nous l'appelons simplement le graphe des dispositifs audio).
Alors pourquoi AudioDG? A l'origine, nous avions appelé le processus DeviceGraph.Exe. Pour un certain nombre de raisons qui ne sont plus pertinentes (elles concernent la technologie d'installation basée sur INF qui était utilisée avant Vista), nous pensions qu'il était nécessaire de limiter nos noms binaires à 8.3 (c'est une longue histoire - en réalité, nous ne le devions pas, mais nous pensions que c'était le cas). Donc, les jolis longs noms que nous avions choisis (AudioEngine.Dll, AudioKSEndpoint.Dll, et DeviceGraph.Exe) ont dû être tronqués à 8.3.
Je pensais qu'il était crucial que tous les composants audio aient le mot "Audio" au début pour clarifier qu'ils avaient à voir avec la fonctionnalité audio. Comme nous pensions être limités aux noms 8.3, cela signifiait que nous avions 3 lettres à utiliser dans le nom. Pour AudioEngine.Dll, c'était relativement simple - cela a été raccourci à AUDIOENG.DLL. De même pour AudioKSEndpoint.Dll, cela a été raccourci à AUDIOKSE.DLL.
Mais DeviceGraph était un peu plus compliqué. J'ai d'abord opté pour AudioADG.EXE (audio+ADG pour Audio Device Graph), mais les gens ont pensé que c'était redondant (cela s'étendait à audio audio device graph).
Finalement, nous nous sommes arrêtés sur "AUDIODG.EXE". Alors pourquoi cette description étrange? Eh bien, parce qu'elle reflète précisément ce qu'est audiodg - c'est une partie de Windows, donc vous obtenez "Windows", il héberge le "Audio Device Graph", et l'isole du Service Audio Windows.
En gros, il ne faut pas l'enlever, il faut faire avec...
I'm bringing this up again because my audiodg.exe program has been consuming an average of 99% of the CPU for the past few days. After some research, I know how to disable it as you mentioned, but I can't manage to do so; the control panel process doesn’t launch the “sounds” module, so I have no way to access the activation or deactivation of audiodg. Moreover, whether it's with the Vista task manager or ProcessExplorer, I can't kill the process...
I'm just starting to get a little fed up. I can't find it in MSCONFIG, so I don’t know how audiodg is launched on startup; it's not very helpful.
I'm not on an Acer, my sound card is installed as standard with the option for enhanced effects, and I believe I've had this problem since I installed iTunes… (I'm not surprised, that program is crap on Windows, despite its effectiveness on OSX).
So anyway, I'm stuck; help me please.
I'm running on Vista Ultimate 64 on an Athlon 4000 with 4GB of RAM... You never know, it might be good to know..
Thanks
my
Do you use the classic view of the control panel? I also use Vista 64 and when I disabled all sound effects, it fixed my problem...
StrasGus
>
my
At home, I can't launch "sounds" in the control panel, the *.*cpl (sounds icon in the pan...) must use a DLL that crashes due to audiodg, and so it doesn't load when it messes up.
The only solution I've found is to put "sounds" in Windows startup so I can disable the effects even before audiodg loads... It works, but you can't miss the timing.
However, even if that idiot correctly registers "disable the ...", I still have to do it again at each startup (strangely).
Anyway, MerdoSoft has messed up again with this piece of crap audiodg (when, if the sound cards are of a high enough quality, they offer their equivalent themselves).
I was on the verge of bringing my computer to customer service,
I was surprised that my CPU usage was at 100€ when I have an Intel Core i3 and even just browsing the internet was a struggle... !