View original (French)

Ink absorber full on Canon MG3250

ndendrael Posted messages 1 Status Member -  
Puces2nimes Posted messages 4 Status Member -
Hello,
after changing my black ink cartridge, an error message appears "support code 1702. Ink absorber full."
I know there is a procedure, but which one is it for this printer?
Thank you

Configuration: Windows / Chrome 56.0.2924.87

1 answer

  1.
    billmaxime Posted messages 50526 Registration date   Status Contributor Last intervention   6 152
     
    hello

    look at the bottom of this page to solve your problem

    http://imprimante-en-question.blogspot.com/2008/08/reservoir-encre-usagee-plein-imprimante.html 

    For newer Canon printers, you need to use a utility to reset:


    see you later

    --
    the radiation level is higher at the employment center than at Chernobyl
    8
    1. Puces2nimes Posted messages 4 Status Member 4
       

      Copilot: Here is a specific procedure to reset the Canon MG3250 printer:

      1. Turn off the printer.
      2. Press and hold the “Stop/Reset” button.
      3. While holding the “Stop/Reset” button, press and hold the “Power” button until the green light comes on.
      4. Release the “Stop/Reset” button while keeping the “Power” button pressed.
      5. Press the “Stop/Reset” button twice.
      6. Release both buttons. The printer should now be in service mode.
      7. Press the “Stop/Reset” button four times to reset the ink counter.
      8. Press the “Power” button to turn off the printer.
      9. Turn the printer back on.

      This procedure should reset the ink counter of your Canon MG32501.

      If you encounter any difficulties or need more information, feel free to ask! ????

      1: Canon inkjet printers: how to reset the Waste Ink Counter

      0