Hello, (This topic is not a duplicate of the first where I explain that I lost the 2.4GHz) Recently installed fiber, I wanted to connect my computer to the Ethernet port of my Bbox at the back (port n°1) while not wanting to disable the WiFi (since I can only connect on 5GHz....) The problem is that no light is lit on my Bbox (except for the one where the Miami box is connected, the TV works) The cable is the one provided with the box Either the cable is defective (I hope....) or the Ethernet port of my computer is defective Configuration: Dell Latitude Windows 7 Pro -- If there is a problem, there is always a solution ~~~~~~ Cs ~~~~~~

Ethernet port connection issue : CCM

Answer 1 / 10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Good

Problem solved

It was the board that was twisted, one of the pins

Fairly complex but resolved

--
If there is a problem, there is always a solution
~~~~~~ Cs ~~~~~~

Answer 2 / 10

little boy62 Posted messages 4393 Registration date Status Member Last intervention 1 790

Hey Lili. :)

How have you been all this time? :P

How many Ethernet ports does your router have?

@++

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Hi there :)

I think it's 3
It looks like this one:
https//www.google.fr/search?q=bbox+sensation+fibre+blanche&client=firefox-b&tbm=isch&oq=bbox+sensation+fibre+blanche&gs_l=mobile-heirloom-serp.12...27972.32129.0.33152.8.8.0.0.0.0.248.1168.1j6j1.8.0....0...1c.1.34.mobile-heirloom-serp..4.4.719.A2VUQf_uwnU#mhpiv=10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

And I tested port number 2, same reaction, no light
In the device manager, my 2 cards are recognized (Wi-Fi card and PCI network cards)

little boy62 Posted messages 4393 Registration date Status Member Last intervention 1 790

Even with another cable? Like the one from the TV?

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818 > little boy62 Posted messages 4393 Registration date Status Member Last intervention

The Miami is connected via Ethernet to the box...
So the cable works (the one that connects bbox>tele box).

little boy62 Posted messages 4393 Registration date Status Member Last intervention 1 790

Except that you need to know if it's not the PC's Ethernet port that is faulty. ^^

If you were to put this cable between the box and the TV and it turns on... the other cable is guilty.

++

Answer 3 / 10

brupala Posted messages 111105 Registration date Status Member Last intervention 14 434

Hello,
does this network card work elsewhere?
and,
do you have anything else, like a Nintendo, to test the cable?

--
and ... there you go!

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Hi there :)
According to the device manager, yes my card is indeed recognized
And no, no other means :(

brupala Posted messages 111105 Registration date Status Member Last intervention 14 434 > lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention

It doesn't mean that the card works physically if you haven't tested it elsewhere.
You should first check if it's really a physical issue by booting your PC with a live CD, like Ubuntu, for example.

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818 > brupala Posted messages 111105 Registration date Status Member Last intervention

I might eventually ask my upstairs neighbor ^^

Answer 4 / 10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Here is a screenshot showing that my card is recognized

When I connected the Ethernet cable, there was an unknown device with an error code 28

--
If there is a problem, there is always a solution
~~~~~~ Cs ~~~~~~

Answer 5 / 10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Here is the problem that appeared when connecting the Ethernet cable

--
If there is a problem, there is always a solution
~~~~~~ Cs ~~~~~~

brupala Posted messages 111105 Registration date Status Member Last intervention 14 434

Look towards your Intel driver, it's probably not the right one for your Windows.

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818 > brupala Posted messages 111105 Registration date Status Member Last intervention

I am on Windows 7.

Answer 6 / 10

kaneagle Posted messages 86269 Registration date Status Moderator Last intervention 14 677

Hello,

Give the device identification number of the unknown device
It's a number that should look like this example:
--> PCI\VEN_1969&DEV_1026&SUBSYS.......
If needed, check --> here
Post the number in your next message.

--
The human being is at its best when things are at their worst.

Answer 7 / 10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Hello Kaenagle

ACPI\SMO8800
That's the only identification number

--
If there is a problem, there is always a solution
~~~~~~ Cs ~~~~~~

Answer 8 / 10

kaneagle Posted messages 86269 Registration date Status Moderator Last intervention 14 677

ACPI
Unzip it
Run setup.exe

--
Human beings are at their best when things are at their worst.

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Ok, I'll test that tomorrow because now it's bedtime :)

xplom Posted messages 13834 Registration date Status Moderator Last intervention 479 > lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention

Good night, sleep early.

Answer 9 / 10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Well, I'm back with news
And I think I've understood the issue
Indeed, I have to disable my Wi-Fi card to activate the Ethernet cable
It may sound silly, but it's logical

--
If there is a problem, there is always a solution
~~~~~~ Cs ~~~~~~

brupala Posted messages 111105 Registration date Status Member Last intervention 14 434

Hello,
If both are going to the same box, yes.
Do not disable the card, cutting the connection should be enough.

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818 > brupala Posted messages 111105 Registration date Status Member Last intervention

Even cutting the connection wasn't enough
It's a laptop, the two can't work at the same time
Or just disable the wifi on the computer

brupala Posted messages 111105 Registration date Status Member Last intervention 14 434 > lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention

It's not normal.
We should be able to use Wi-Fi and Ethernet at the same time on two different networks.

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818 > brupala Posted messages 111105 Registration date Status Member Last intervention

It's the same network for both Wi-Fi and Ethernet…

brupala Posted messages 111105 Registration date Status Member Last intervention 14 434 > lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention

Yes, but cutting the Wi-Fi connection should be enough, unless it reconnects automatically on its own afterwards.

Answer 10 / 10

lilidurhone Posted messages 800 Registration date Status Security Contributor Last intervention 3 818

Good
I'm checking in
It's definitely an Ethernet card problem
The wifi is working luckily

--
If there is a problem, there is always a solution
~~~~~~ Cs ~~~~~~

Ethernet port connection issue

10 answers

How to write a document without a word subscription?

Texture issues in enshrouded

Dead screen?

Too many ads during the games

New law: €1500 fine for poor waste management.

No "pin - windows hello" prompt at windows 10 startup

Identifying the source of an mp3 problem?

Keyboard on network x

Problem with my sound!

Error 3005 on france tv