boîtier ethernet android Solved

Question

Hello!

I bought an Android box, I connected it to the TV, and I set it up. It works very well.
I configured the Wi-Fi, it works very well, but it's not strong enough to watch TV channels on Kodi.

It is connected via Ethernet with a cable. But now, I'm stuck.

Could you please help me and tell me how to configure the box via Ethernet? (IP addresses, gateway... or another method)

Thank you

IRainBoww · Accepted Answer

Hi there, the IP address depends on which "default gateway" you're on. Normally, you shouldn't need to touch the gateway, but can you do anything else that requires an internet connection?

fredebrick · Answer

Hello,

here is what I have:

I noted to set on the Android box

Freebox Router
Start IP DHCP
End IP DHCP
Static IP Address
MAC
IPv4

On the Android box:
Static configuration
IP address
Network Prefix length
Gateway
DNS1
DNS2
MAC

how to match the two, please, one is in French, the other is in English.

I found a manual for an Android box online, I'll give you an excerpt, if it can help!

II- Connect your Android TV Box to a Wi-Fi internet connection
Your Android TV Box has a Wi-Fi connection. To connect to a Wi-Fi network, follow these steps:
1. When you are on the home screen of your box, go to settings.
2. Click on Network and choose Wi-Fi. Once activated, a list of available Wi-Fi networks will appear on the right side of the screen.
3. Select the network you want to connect to. You must have the access codes to connect to this network. Enter the network key if necessary, then click validate.
4. Once your box is connected, you will have access to the Internet and be able to browse as you wish.
You can also connect your Android TV Box to your internet connection via an Ethernet RJ45 cable (not provided). Simply plug it into the socket provided at the back of your Android TV Box and then disable the WiFi on it. In the Network section, you can select "Ethernet" and you will then be connected to the internet via this RJ45 connection.

On my side, Wi-Fi works very well.
Does the connection occur automatically as soon as the RJ45 is plugged in?

thank you for your help.

fredebrick · Answer

Problem resolved by the installation of [/contents/181-cpl-courants-porteurs-en-ligne cpl. thank you.

Boîtier ethernet android

3 answers

Taskbar that hides

Phone not receiving certain sms

Free phone no tone..

Puk code and password on samsung

Intrusive ads

Chkdsk /f and sfc /scannow okay, but startup impossible.

Transfer mp3 from pc to mobile

How to disable the ad blocker in firefox

Set up a printer

[libreoffice] installation failed