FAX PANASONIC KX-FT988

Solved
nouna1602 Posted messages 2 Status Member -  
 Rachidboudjahlat -
HELLO;
MY FAX MACHINE NO LONGER DISPLAYS THE INCOMING PHONE NUMBERS (IT ONLY SHOWS INCOMING CALL) AND WHEN I PRESS "CALLER ID" THE MISSED CALLS DO NOT SHOW UP (IT JUST SAYS NO ITEMS STORED).
PLEASE ADVISE ME ON WHAT TO DO.

4 answers

baladur13 Posted messages 47295 Registration date   Status Moderator Last intervention   14 380
 
For the jam, the instructions on page 44 state:
(Click on the image to open it enlarged in a new tab)
As for the "stacker"... the instructions on page 39 specify... to ensure that it is properly in place.

--
 It's very difficult to catch a black cat in a dark room.
                              Especially when it's not there...
1
Zizou
 
Dear "baladur13," thank you for all the explanations.
0
Rachidboudjahlat
 
My sincere regards
0
baladur13 Posted messages 47295 Registration date   Status Moderator Last intervention   14 380
 
Hello,
If I can believe the notice on page 25
"Incoming Call" denotes that the device is in Tel/Fax mode.
In other words, if after a time equivalent to 2 rings it detects a fax, it automatically switches to fax; otherwise, it starts ringing and it's up to you to answer.
The English manual is accessible (by entering the device reference in the "Enter your product reference" box and then clicking search) via
http://www.panasonic.eu/downloads/fr_FR/popup.html

Note: Please avoid using capital letters in the future as they are considered aggressive on the Web...
 It is very difficult to catch a black cat in a dark room.
Especially when it isn’t there...
0
nouna1602 Posted messages 2 Status Member
 
Hello again;
Thank you for your reply and your remark.
Indeed, the fax works as such/fax because I need the phone; however, previously it displayed the numbers of incoming calls normally and when I had a missed call I could display it by pressing the CALLER ID button, but since the change of my phone line I have lost this option and I can't find how to display the numbers.
Thank you in advance.
0
baladur13 Posted messages 47295 Registration date   Status Moderator Last intervention   14 380
 
Shouldn't we set the device to TAM/FAX (Answering Machine/Fax) rather than TEL/FAX?
0
Zizou
 
My device keeps showing the message PAPER JAMMED then CHECK STACKER.
Is there a solution to this? Thank you.
0
baladur13 Posted messages 47295 Registration date   Status Moderator Last intervention   14 380
 
Hello,
My device Which device? The KT-FT988.
This means that there is a paper jam and that we are asking to check the stacker (it's the metal frame that catches the sheets as they come out)......
0
Zizou > baladur13 Posted messages 47295 Registration date   Status Moderator Last intervention  
 
Hi, first of all, thank you for your attention.
Yes, it is indeed a KX-FT988.
What should I do with this bracket? Thank you.
0