View original (French)

Short circuit of my antenna

Solved
Nasaesa Posted messages 3 Status Membre -  
 Gege -
Hello

I have a CGV STL-2 / Etimo 1T-2 receiver and my problem is that as soon as I connect my antenna to the antenna input of my receiver, a message appears saying that a short circuit has been detected on the antenna input. I don't understand because this antenna worked before...
I connected a coaxial cable between the receiver and the antenna but it doesn't change anything...

1 réponse

Réponse 1 / 1
Andy31200 Posted messages 111504 Registration date   Status Modérateur Last intervention   12 197
 
Hello,
Your terminal must be equipped with a 5-volt power supply via coaxial to power a mast preamplifier, and that’s what’s causing the trouble because you don’t have a preamplifier, so your antenna is short-circuiting; look in the menu and disable this function.

--
I call a cat a cat *
*in French in the text
18
Nasaesa Posted messages 3 Status Membre 4
 
Thank you for your response

Do we need to disable the Antenna Power? Because as soon as the short circuit is detected, it disables itself.
4
Andy31200 Posted messages 111504 Registration date   Status Modérateur Last intervention   12 197
 
Yes, the antenna power supply must be disabled.
-1
Nasaesa Posted messages 3 Status Membre 4
 
Thank you for your help, I can finally receive channels. Have a nice end of the day.
0
Andy31200 Posted messages 111504 Registration date   Status Modérateur Last intervention   12 197
 
You're welcome, problem solved.
0
Gege
 

Hello, short circuit problem resolved. The copper wire must extend by 2 mm, no more. Now it works ????

0