Caliber RCD231BT Bluetooth Car Radio
Solved
Gégé
-
Gégé -
Gégé -
Hello,
I installed my car radio and everything works, but when I turn it off and cut the ignition, the FM programming disappears when I turn it back on.
What should I do to save the presets after selecting buttons 1, 2, 3, etc.?
Thank you
Configuration: Windows / Firefox 45.0
I installed my car radio and everything works, but when I turn it off and cut the ignition, the FM programming disappears when I turn it back on.
What should I do to save the presets after selecting buttons 1, 2, 3, etc.?
Thank you
Configuration: Windows / Firefox 45.0
1 answer
Hello
Check if the yellow wire is connected to the red wire; the yellow wire is the direct current wire and the memory wire. If it is not connected to the red wire, connect it to the terminal on the red wire. You just have to unplug the yellow wire and plug it into the red wire, and that's it. You will keep all your settings and the stations will be saved in memory.
Check if the yellow wire is connected to the red wire; the yellow wire is the direct current wire and the memory wire. If it is not connected to the red wire, connect it to the terminal on the red wire. You just have to unplug the yellow wire and plug it into the red wire, and that's it. You will keep all your settings and the stations will be saved in memory.
Gégé
thank you, it's all good