View original (French)

DVD Player and TV Connection Issue

Solved
Lameli2 Posted messages 10 Status Member -  
Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   -
Good evening,

I have an old Daewoo DTL-2930 television that I only use to watch DVDs (I never watch TV, no digital terrestrial).
I just acquired a new Sony DVD player - DVP-SR760H. I have a scart cable from the television connected to the DVD player: 3 plugs - red, yellow, white.
Everything is turned on, but they are functioning independently; there is nothing on the screen. What should I do?
Thank you for your help; the seller's advice did not yield any results.

2 answers

  1.
    athena223 Posted messages 14406 Registration date   Status Contributor Last intervention   2 807
     
    Good evening,

    You need to change the "Source" on the television.
    Normally, on your TV remote, you will find a button labeled source, or otherwise an arrow that comes from the left and points into a rectangle.

    Sometimes, depending on the model, you can also cycle through channels until you reach "AV" etc.

    --
    Doing research yourself before posting on CCM is the quickest solution!
    I'm terrible at French, but I own it!
    1
    1. athena223 Posted messages 14406 Registration date   Status Contributor Last intervention   2 807
       
      If the images I found on the internet are correct, it's one of the buttons at the top of the remote, under the power and mute buttons; one of the four buttons is used to select the correct source.
      0
    2. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 200
       
      It might also be that the SCART to RCA yellow, white, and red cable is wired the wrong way, but we'll see about that tomorrow... drinks!
      0